[pure-silver] Re: Giving Up On Foam Camera Back Seals
- From: Tim Daneliuk <tundra@xxxxxxxxxxxxxx>
- To: pure-silver@xxxxxxxxxxxxx
- Date: Mon, 13 Jul 2020 11:12:25 -0500
On 7/13/20 10:49 AM, Speedy _ wrote:
IIRC the fellow I used to buy light baffle material from went by the name
"Interslice" on Ebay. He made a very good kit that would do multiple cameras
and sold it at a good price. I have been unable to find him.
I did have a link to where this is still being sold by Microtools:
https://www.micro-tools.com/products/lb116
They seem to have two kits of different sizes.
Chuck
<https://www.micro-tools.com/products/lb116>
Light Baffle, .0625” - 1/16” | Micro-Tools
<https://www.micro-tools.com/products/lb116>
Mirror Cushion & Light Trap Foam.1.6mm thickness.Available in 10”
squares, with self adhesive peel-off backing. Mirror Cushion & Light Trap
Foam 1.6mm thickness Available in 10” squares, with self adhesive peel-off
backing. SKU: LB116 UPC: 014891164864 BRAND: Micro-Tools MPN: SC42BL 1/16
in.PSA Made In: Unite
www.micro-tools.com
I have a number of such sheets in various thicknesses. The problem is
that when you cut them very narrow - say 2-3mm - trying to position them
in a back door channel and keeping the adhesive side down is very difficult.
It's not impossible, and I've done it many times - but it's too time
consuming to be worth it.
That's why I liked the pure compression foam with no adhesive, but
I cannot find it anywhere. Felt/yarn appears to do the same job just
as well, with no adhesive required.
----------------------------------------------------------------------------
Tim Daneliuk tundra@xxxxxxxxxxxxxx
PGP Key:
http://www.tundraware.com/PGP/
=============================================================================================================
To unsubscribe from this list, go to www.freelists.org and logon to your
account (the same e-mail address and password you set-up when you subscribed,)
and unsubscribe from there.
Other related posts:
