[pure-silver] Re: Ever Ferrotype?
- From: "Richard Knoppow" <dickburk@xxxxxxxxxxxxx>
- To: <pure-silver@xxxxxxxxxxxxx>
- Date: Thu, 22 May 2008 20:08:21 -0700
----- Original Message -----
From: "Mark Blackwell" <mblackwell1958@xxxxxxxxx>
To: <pure-silver@xxxxxxxxxxxxx>
Sent: Thursday, May 22, 2008 6:50 PM
Subject: [pure-silver] Re: Ever Ferrotype?
Ok this may be the solution to the not totally satisfied
with the blacks if an RC print is best when dried in IR.
The next question becomes, what is an inexpensive and
practical drying source. Hanging them or placing them on
a drying screen is easy, and an expensive dryer probably
isn't in the budget, but if there is a normal everyday
type of item that works and is effective, Im all ears.
You can use self-reflector IR lamps, AKA heat lamps. A
simple dryer can be made with about four of these guys.
AFAIK they are available in any hardware store, Home Depot,
etc.
---
Richard Knoppow
Los Angeles, CA, USA
dickburk@xxxxxxxxxxxxx
=============================================================================================================
To unsubscribe from this list, go to www.freelists.org and logon to your
account (the same e-mail address and password you set-up when you subscribed,)
and unsubscribe from there.
Other related posts:
