[pure-silver] Re: Efke R100 Chapter 2: PMK

  • From: "BOB KISS" <bobkiss@xxxxxxxxxxxxx>
  • To: <pure-silver@xxxxxxxxxxxxx>
  • Date: Thu, 19 May 2011 10:34:55 -0400

DEAR TIM,
        I don't know if the world is but I am certainly awaiting your
results of AGFAORTHO 25 in PMK.
                CHEERS!
                        BOB

-----Original Message-----
From: pure-silver-bounce@xxxxxxxxxxxxx
[mailto:pure-silver-bounce@xxxxxxxxxxxxx] On Behalf Of Tim Daneliuk
Sent: Thursday, May 19, 2011 10:23 AM
To: pure-silver@xxxxxxxxxxxxx
Subject: [pure-silver] Efke R100 Chapter 2: PMK

In my ongoing saga of Efke film, I decided to try it with PMK.  Here's
what I found:

- ASA 100 - Normal development of 13 mins @ 68F, agitating every 15 sec.

- The negs look great

- I do not normally clip rollfilm into the retaining clip in the
   center of the reel.  I just thread one end into the core of the reel
   and rotate the reel to load.  I've done this for years to avoid
   the "half moons" you can get at the end of a roll when trying to
   position the film into the clip.  The Efke base is so very thin
   that it actually slipped out of the reel core and started unwinding
   during processing.  I ended up doing about 5 minutes of
   Dip-N-Dunk.  This had two consequences:

     a) It tore up some of the very soft emulsion on part of the
        roll.  This is a REALLY touchy emulsion that scratches if
        you even glare at it. About 1/3 of the negs were compromised.
        Fortunately, it was nothing particularly important.

     b) The last 5 minutes ended up causing me to agitate somewhat more
        than usual because the film was in constant motion.  This could
        have some slight effect on the amount of development.

So ... I'm going to have to learn how to clip the film in place without
damaging or pinching it.

Other than this, the negs look great and I can't wait to print them.

Next up:  Agfa Ortho 25 in PMK - The World Is Waiting.
-- 
----------------------------------------------------------------------------
Tim Daneliuk     tundra@xxxxxxxxxxxxxx
PGP Key:         http://www.tundraware.com/PGP/

============================================================================
=================================
To unsubscribe from this list, go to www.freelists.org and logon to your
account (the same e-mail address and password you set-up when you
subscribed,) and unsubscribe from there.

__________ Information from ESET NOD32 Antivirus, version of virus signature
database 6135 (20110519) __________

The message was checked by ESET NOD32 Antivirus.

http://www.eset.com



=============================================================================================================
To unsubscribe from this list, go to www.freelists.org and logon to your 
account (the same e-mail address and password you set-up when you subscribed,) 
and unsubscribe from there.

Other related posts: