[program-l] Re: pyreadline Problem with Jaws(was, Re: Re: Enthought Python and Jaws?

  • From: Al Puzzuoli <alpuzz@xxxxxxxxx>
  • To: program-l@xxxxxxxxxxxxx
  • Date: Wed, 24 Oct 2012 07:24:16 -0400

Hi jIm,
I believe pyreadline is the Windows Analog to Readline, but i'm not positive. Have you used it under Windows?

Al

On 10/24/2012 7:12 AM, Homme, James wrote:
Hi,
Is Pyreadline different from readline?

Jim


-----Original Message-----
From: program-l-bounce@xxxxxxxxxxxxx [mailto:program-l-bounce@xxxxxxxxxxxxx] On 
Behalf Of Al Puzzuoli
Sent: Tuesday, October 23, 2012 5:29 PM
To: program-l@xxxxxxxxxxxxx
Subject: [program-l] pyreadline Problem with Jaws(was, Re: Re: Enthought Python 
and Jaws?

So after doing some more digging, turns out that the problem isn't with 
Enthought Python itself, but with the pyreadline package. If this is installed 
and active, it seems that most python distros will use it by default. When they 
do, weird things happen with Jaws, as I described previously. It's almost as if 
pyreadline is redrawing the line with each keypress . Pyreadline can be 
disabled by means of pyreadlineconfig.ini in your home folder, but since it 
provides tab conpletion, it would be sort of nice to have around. However at 
this point, I have just disabled it to avoid the annoyance. Does anyone know a 
workaround for this? I wanted to report this as an issue on GuitHub, but it 
appears you need to pay for an account, just to have the ability to report 
bugs? Is that accurate or am I missing something?

Al

On 10/22/2012 7:36 AM, Homme, James wrote:
Hi Al,
I haven't seen this distribution. You might want to check out Portable Python. 
See http://www.portablepython.com/. It comes with a lot of packages out of the 
box.

Jim



-----Original Message-----
From: program-l-bounce@xxxxxxxxxxxxx
[mailto:program-l-bounce@xxxxxxxxxxxxx] On Behalf Of Al Puzzuoli
Sent: Friday, October 19, 2012 9:52 PM
To: Program L
Subject: [program-l] Enthought Python and Jaws?

Has anyone else tried using Enthought Python with Jaws? This looks like a pretty 
nice distro, with all the libraries I would want, especially Pandas prepackaged and 
ready to go. However at least in its default configuration, it behaves very badly 
with Jaws. When I type into the CLI,, each letter is echoed back, regardless of Jaws 
key echo settings, and as I continue typing, those letters slowly become words, 
like, "t th thi this', annoying to say the least! I suspect this has something 
to do with the way Enthought is highlighting user input? Are there any settings 
within the shell that will make this better, or do I need to use an alternative 
distro?
Thanks,

Al

** To leave the list, click on the immediately-following link:-
** [mailto:program-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** program-l-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:program-l-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** program-l-request@xxxxxxxxxxxxx with the Subject:- faq

________________________________

This e-mail and any attachments to it are confidential and are intended solely 
for use of the individual or entity to whom they are addressed. If you have 
received this e-mail in error, please notify the sender immediately and then 
delete it. If you are not the intended recipient, you must not keep, use, 
disclose, copy or distribute this e-mail without the author's prior permission. 
The views expressed in this e-mail message do not necessarily represent the 
views of Highmark Inc., its subsidiaries, or affiliates.
N ^j  b  %  (  ^ i v& z\  Yh ) )ä   k
ÚZÞç  zX   + Ë  -é & ! a  b Ghz  Â     jg     k
ÚZÞç  zX   +  Ý{ay+   - )Þ*^ {.n +     -    \ i   ,  Z  jØ jy brJ' 
  g   ^ ' Z0 x% y&j)m  è      -~   +-     y }   Çu   Æz )  +jikz     y
b  (
" ay+   -faq=

** To leave the list, click on the immediately-following link:-
** [mailto:program-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** program-l-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:program-l-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** program-l-request@xxxxxxxxxxxxx with the Subject:- faq
Nï^jïïbïï%ïï(ïï^ïiïv&ïz\ïïYhï)ï)äïïïkï
ÚZÞçïïzXïïï+ïËïï-éï&ï!ïaïïbïGhzïïÂïïïïïjgïïïïïkï
ÚZÞçïïzXïïï+ïïÝ{ay+ïïï-ï)Þ*^ï{.nï+ïïïïï-ïïïï\ïiïïï,ïïZïïjØïjyïbrJ'ïïïgïïï^ï'ïZ0ïx%ïy&j)mïïèïïïïïï-~ïïï+-ïïïïïyï}ïïïÇuïïïÆzï)ïï+jikzïïïïïyïbïï(ï
"ïay+ïïï-faq=

** To leave the list, click on the immediately-following link:-
** [mailto:program-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** program-l-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:program-l-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** program-l-request@xxxxxxxxxxxxx with the Subject:- faq

Other related posts: