[program-l] Re: pyreadline Problem with Jaws(was, Re: Re: Enthought Python and Jaws?
- From: "Homme, James" <james.homme@xxxxxxxxxxxx>
- To: "program-l@xxxxxxxxxxxxx" <program-l@xxxxxxxxxxxxx>
- Date: Wed, 24 Oct 2012 11:12:19 +0000
Hi,
Is Pyreadline different from readline?
Jim
-----Original Message-----
From: program-l-bounce@xxxxxxxxxxxxx [mailto:program-l-bounce@xxxxxxxxxxxxx] On
Behalf Of Al Puzzuoli
Sent: Tuesday, October 23, 2012 5:29 PM
To: program-l@xxxxxxxxxxxxx
Subject: [program-l] pyreadline Problem with Jaws(was, Re: Re: Enthought Python
and Jaws?
So after doing some more digging, turns out that the problem isn't with
Enthought Python itself, but with the pyreadline package. If this is installed
and active, it seems that most python distros will use it by default. When they
do, weird things happen with Jaws, as I described previously. It's almost as if
pyreadline is redrawing the line with each keypress . Pyreadline can be
disabled by means of pyreadlineconfig.ini in your home folder, but since it
provides tab conpletion, it would be sort of nice to have around. However at
this point, I have just disabled it to avoid the annoyance. Does anyone know a
workaround for this? I wanted to report this as an issue on GuitHub, but it
appears you need to pay for an account, just to have the ability to report
bugs? Is that accurate or am I missing something?
Al
On 10/22/2012 7:36 AM, Homme, James wrote:
> Hi Al,
> I haven't seen this distribution. You might want to check out Portable
> Python. See http://www.portablepython.com/. It comes with a lot of packages
> out of the box.
>
> Jim
>
>
>
> -----Original Message-----
> From: program-l-bounce@xxxxxxxxxxxxx
> [mailto:program-l-bounce@xxxxxxxxxxxxx] On Behalf Of Al Puzzuoli
> Sent: Friday, October 19, 2012 9:52 PM
> To: Program L
> Subject: [program-l] Enthought Python and Jaws?
>
> Has anyone else tried using Enthought Python with Jaws? This looks like a
> pretty nice distro, with all the libraries I would want, especially Pandas
> prepackaged and ready to go. However at least in its default configuration,
> it behaves very badly with Jaws. When I type into the CLI,, each letter is
> echoed back, regardless of Jaws key echo settings, and as I continue typing,
> those letters slowly become words, like, "t th thi this', annoying to say the
> least! I suspect this has something to do with the way Enthought is
> highlighting user input? Are there any settings within the shell that will
> make this better, or do I need to use an alternative distro?
> Thanks,
>
> Al
>
> ** To leave the list, click on the immediately-following link:-
> ** [mailto:program-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
> ** If this link doesn't work then send a message to:
> ** program-l-request@xxxxxxxxxxxxx
> ** and in the Subject line type
> ** unsubscribe
> ** For other list commands such as vacation mode, click on the
> ** immediately-following link:-
> ** [mailto:program-l-request@xxxxxxxxxxxxx?subject=faq]
> ** or send a message, to
> ** program-l-request@xxxxxxxxxxxxx with the Subject:- faq
>
> ________________________________
>
> This e-mail and any attachments to it are confidential and are intended
> solely for use of the individual or entity to whom they are addressed. If you
> have received this e-mail in error, please notify the sender immediately and
> then delete it. If you are not the intended recipient, you must not keep,
> use, disclose, copy or distribute this e-mail without the author's prior
> permission. The views expressed in this e-mail message do not necessarily
> represent the views of Highmark Inc., its subsidiaries, or affiliates.
> N ^j b % ( ^ i v& z\ Yh ) )ä k
> ÚZÞç zX + Ë -é & ! a b Ghz  jg k
> ÚZÞç zX + Ý{ay+ - )Þ*^ {.n + - \ i , Z jØ j y brJ'
> g ^ ' Z0 x% y&j)m è -~ +- y } Çu Æz ) +jikz y
> b (
" ay+ -faq=
** To leave the list, click on the immediately-following link:-
** [mailto:program-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** program-l-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:program-l-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** program-l-request@xxxxxxxxxxxxx with the Subject:- faq
Other related posts:
