[program-l] Re: Wordpress main menu

  • From: "Dang Manh Cuong" <dangmanhcuong@xxxxxxxxx>
  • To: <program-l@xxxxxxxxxxxxx>
  • Date: Sun, 10 Sep 2017 11:46:05 +0700

Hi Mr. Jackie
I don't know I explained correctly or not so I give some more info. . I want to do the same as you did at the wp4noobs. At the navigation regionn, I saw three menus: lesson, parent, child of parrent. Those always appear. In my site, I created a menu, but it appeared as a button, and user must press enter to open it. No problem for me, but it would be difficulty with some beginner so I want to do the same as you did. Currently, I use the Simple Grey theme. Is it accessible for screen reader?
Any help would be appreciated.
---------------
Dang Manh Cuong
The Assistive technology specialist
Sao Mai Vocational and assistive center for the blind
52/22 Huynh Thien Loc St., Hoa Thanh ward, Tan Phu dist., HCM, Vietnam.
Tel: +8428 7302-4488
E-mail: vanphong@xxxxxxxxxxxxxxxxxx; congnghe@xxxxxxxxxxxxxxxxxx
Facebook: https://www.facebook.com/SaoMaiCenter
Website: http://www.trungtamsaomai.org; http://www.saomaicenter.org

Mobile / Zalo: +84 902-572-300
E-mail: dangmanhcuong@xxxxxxxxx; cuong@xxxxxxxxxxxxxxxxxx
Skype name: dangmanhcuong
facebook: http://facebook.com/dangmanhcuong
Twitter: @ManhCuongTech
----- Original Message ----- From: "Jackie McBride" <abletec@xxxxxxxxx>
To: <program-l@xxxxxxxxxxxxx>
Sent: Sunday, September 10, 2017 11:13 AM
Subject: [program-l] Re: Wordpress main menu


Hi, Cuong. I'm the developer of wp4newbs. I hope you enjoyed the site
& found it useful.

This is a bit of a complex subject, ie., there are quite a few
interactions taking place. By default, WordPress puts every page you
create in the menu. You can override what WP does by creating your own
menu under 'Appearance' > 'Menus". Having said that, much is dependant
on the particular theme you're using. Some themes support a horizontal
menu, others both a horizontal & vertical menu. So you'll need to
determine what your theme permits.

HTH.

On 9/9/17, Dang Manh Cuong <dangmanhcuong@xxxxxxxxx> wrote:
To all listers
I'd like my wordpress site has some main link at the top, such as home,
about, contact, but don't know how to do that. Please help me. I think of
creating a menu, and I can do that, but user must press enter to activate
the menu, and on some website such as wp4noobs, sound like the developer do
in other method.
Any help would be appreciated.
Cuong
Cuong
---------------
 Dang Manh Cuong
 The Assistive technology specialist
 Sao Mai Vocational and assistive center for the blind
52/22 Huynh Thien Loc St., Hoa Thanh ward, Tan Phu dist., HCM, Vietnam.
 Tel: +8428 7302-4488
 E-mail: vanphong@xxxxxxxxxxxxxxxxxx; congnghe@xxxxxxxxxxxxxxxxxx
 Facebook: https://www.facebook.com/SaoMaiCenter
 Website: http://www.trungtamsaomai.org; http://www.saomaicenter.org

 Mobile / Zalo: +84 902-572-300
 E-mail: dangmanhcuong@xxxxxxxxx; cuong@xxxxxxxxxxxxxxxxxx
 Skype name: dangmanhcuong
 facebook: http://facebook.com/dangmanhcuong
 Twitter: @ManhCuongTech


--
Remember! Friends Help Friends Be Cybersafe
Jackie McBride
Helping Cybercrime Victims 1 Person at a Time
https://brighter-vision.com
** To leave the list, click on the immediately-following link:-
** [mailto:program-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** program-l-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:program-l-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** program-l-request@xxxxxxxxxxxxx with the Subject:- faq


** To leave the list, click on the immediately-following link:-
** [mailto:program-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** program-l-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:program-l-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** program-l-request@xxxxxxxxxxxxx with the Subject:- faq

Other related posts: