The following new message has been posted on Phorm Support Forum at <http://www.phorm.com/support/>. *************************************************************************** MESSAGE: (#3805) Re: Validation <http://www.phorm.com/support/?rev=3805> AUTHOR: Holotech DATE: March 3, 2004 at 9:34 a.m. EST Reply To: (#3802) Re: Validation Author: Jamie Cadorette Date: March 3, 2004 at 9:26 a.m. EST > I set PHORM_NAME in the form to feedback. I created a > feedback directory in the phrom directory, then > created a templates directory in the feedback > directory. Just to be sure, I set the debug flag 2 and > this is indeed where phorm is supposedly looking for > my ruleset.txt file, which I have in the said > location. I have formatted it according to > documentation and still validation does not work. It > finds and applies mtemplate just fine, which is also > in the same location. Any other ideas? Email me your form, config file and rules file as attachments. *************************************************************************** This is an automatically-generated notice. If you'd like to be removed from the mailing list, please visit Phorm Support Forum at <http://www.phorm.com/support/>, or send your request to webbbs@xxxxxxxxxx If you wish to respond to this message, please post your response directly to the board. Thank you! ------------------------------------------------- You are receiving this message because you are subscribed to the Phorm mailing list. To send messages to the mailing list, simply send email to phorm@xxxxxxxxxxxxx from the address you have subscribed. You may unsubscribe from the list by sending email to phorm-request@xxxxxxxxxxxxx with 'unsubscribe' in the SUBJECT field.