Yes, with the CMNT (Comment) rule component. -- Alan Little Phorm Support http://www.phorm.com/ On Tuesday, March 9, 2004, 7:19:05 AM, you wrote: > I think I was the first person to request this, but having > thought more about it, I don't think it would provide any > efficiency gains, except it may make it easier to understand what > is happening for each field. > However, can comments be included in the rules files? > Best regards, Brian >> Currently, no. Each rule requires at least CRIT, FFLD and MESG (and >> ARGS for some criteria). I'm talking about a future release: only the >> first rule would require a FFLD component; the rest of the rules for >> that field would only need CRIT and MESG. Not a big savings as far as >> I can see, since you currently can just copy and paste a rule and then >> change the CRIT and MESG components, but you're the second person to >> request this. > ============================================================= > Omega Digital Media Ltd > I N T E G R A T E D ~ W E B ~ S O L U T I O N S > Phone: +44 (0)1444 410 202 > Fax: +44 (0)1444 456 814 > http://www.omegadm.co.uk > ============================================================= > Cuckfield House, High Street, Cuckfield, West Sussex RH17 5EL > ------------------------------------------------- > You are receiving this message because you are subscribed to the Phorm > mailing list. To send messages to the mailing list, simply send email to > phorm@xxxxxxxxxxxxx from the address you have > subscribed. You may unsubscribe from the list by sending email to > phorm-request@xxxxxxxxxxxxx with 'unsubscribe' in the SUBJECT field. ------------------------------------------------- You are receiving this message because you are subscribed to the Phorm mailing list. To send messages to the mailing list, simply send email to phorm@xxxxxxxxxxxxx from the address you have subscribed. You may unsubscribe from the list by sending email to phorm-request@xxxxxxxxxxxxx with 'unsubscribe' in the SUBJECT field.