The following new message has been posted on Phorm Support Forum at <http://www.phorm.com/support/>. *************************************************************************** MESSAGE: (#3816) Re: Multiple validation rules per field <http://www.phorm.com/support/?rev=3816> AUTHOR: Holotech DATE: March 5, 2004 at 7:37 a.m. EST Reply To: (#3813) Multiple validation rules per field Author: Lyle Dove Date: March 3, 2004 at 1:59 p.m. EST > Well, here is another question. I have to apply > multiple validation rules to some fields. > Is there a easier way to do this than create a > separate rule# for each validation criteria? Well, remember that the RULE component is optional, so that saves you some typing, unless you really need it. Without it, rules are numbered sequentially. Apart from that, you're stuck with copy/paste for now. I suppose it would be feasible to make it so that if a rule doesn't have a FFLD component, it would use the field from the previous rule. I'll do that, but I don't know if it will make it into the next release. *************************************************************************** This is an automatically-generated notice. If you'd like to be removed from the mailing list, please visit Phorm Support Forum at <http://www.phorm.com/support/>, or send your request to webbbs@xxxxxxxxxx If you wish to respond to this message, please post your response directly to the board. Thank you! ------------------------------------------------- You are receiving this message because you are subscribed to the Phorm mailing list. To send messages to the mailing list, simply send email to phorm@xxxxxxxxxxxxx from the address you have subscribed. You may unsubscribe from the list by sending email to phorm-request@xxxxxxxxxxxxx with 'unsubscribe' in the SUBJECT field.