The following new message has been posted on Phorm Support Forum at <http://www.phorm.com/support/>. *************************************************************************** MESSAGE: (#3819) Re: Multiple validation rules per field <http://www.phorm.com/support/?rev=3819> AUTHOR: Lyle Dove DATE: March 5, 2004 at 10:55 a.m. EST Reply To: (#3816) Re: Multiple validation rules per field Author: Holotech Date: March 5, 2004 at 7:37 a.m. EST > Well, remember that the RULE component is optional, so > that saves you some typing, unless you really need it. > Without it, rules are numbered sequentially. > Apart from that, you're stuck with copy/paste for now. > I suppose it would be feasible to make it so that if a > rule doesn't have a FFLD component, it would use the > field from the previous rule. I'll do that, but I > don't know if it will make it into the next release. Hmm.. Let me ask this, how would you recombine the ruleset? Its currently setup to do 3 different checks on the same field, but can this be combined into a single RULE: section is my question. Or can I specify multiple CRIT:/ARGS:/COND: under the same RULE: section. By section in my definition, I mean before the rule '###' termination string. *************************************************************************** This is an automatically-generated notice. If you'd like to be removed from the mailing list, please visit Phorm Support Forum at <http://www.phorm.com/support/>, or send your request to webbbs@xxxxxxxxxx If you wish to respond to this message, please post your response directly to the board. Thank you! ------------------------------------------------- You are receiving this message because you are subscribed to the Phorm mailing list. To send messages to the mailing list, simply send email to phorm@xxxxxxxxxxxxx from the address you have subscribed. You may unsubscribe from the list by sending email to phorm-request@xxxxxxxxxxxxx with 'unsubscribe' in the SUBJECT field.