-=PCTechTalk=- Re: Boot Disk Failure
- From: Gman <gman.pctt@xxxxxxxxx>
- To: <pctechtalk@xxxxxxxxxxxxx>
- Date: Mon, 20 Oct 2008 01:57:12 -0400
Warren,
The resistence to pulling the cable out at the drive is normal. The
looseness at the motherboard is not.
Peace,
Gman
"The only dumb questions are the ones we fail to ask"
----- Original Message -----
From: "Warren Standifird" <wstandifird@xxxxxxxxxxx>
To: <pctechtalk@xxxxxxxxxxxxx>
Sent: Monday, October 20, 2008 1:40 AM
Subject: -=PCTechTalk=- Re: Boot Disk Failure
> Hi Gman,
>
> Seems that I just can't make it past the issue of connecting that data
> cable. With the end connected to the drive there is some resistance when I
> try to pull it off. But the end that is connected to the mother board
> comes off if I just touch it. Now I will take the whole computer down to
> the workbench in the garage and see if I can get it done there.
>
> Warren
---------------------------------------------------------------
Please remember to trim your replies (including this sentence and everything
below it) and adjust the subject line as necessary.
To unsubscribe or change your email settings:
//www.freelists.org/webpage/pctechtalk
To access our Archives:
http://groups.yahoo.com/group/PCTechTalk/messages/
//www.freelists.org/archives/pctechtalk/
To contact only the PCTT Mod Squad, write to:
pctechtalk-moderators@xxxxxxxxxxxxx
To join the PCTableTalk off-topic group, send a blank email to:
pctabletalk+subscribe@xxxxxxxxxxxxxxxx
---------------------------------------------------------------
Other related posts:
