The one I share would be the best just to set up OpenTX Companion software.
Yes he has a lot of videos on what to do and a little easter for me that I
do not have to deal with the accents.
I am working through them all right now when time permits.
It is good that we can help others to learn OpenTX.
Larry
On Tue, Sep 7, 2021 at 1:55 PM Jerry Horschman <ghorschman@xxxxxxxxx> wrote:
Larry,
It is interesting that you put this link out for the operation of the
Companion. I did all of my programming through the buttons on the
transmitter.
I like this guy because he talks about a lot of the neat things
that OpenTx supports including a number of programming "best practices". I
think one of the coolest things it supports is the concept of instant trim,
which could be very useful for maidens. He has assigned his momentary
switch so that it will copy the stick positions to the trim settings.
Let's say that you have just figured out what it takes to make your plane
fly straight and level. All you have to do is hit the momentary switch and
release the sticks. The trims now reflect the offsets from neutral on the
radio. You can also do it one axis at a time.
After the plane is back on the ground, he can copy the trim settings for
each axis to the sub-trim offsets in the transmitter. Pretty cool...
The video covers a lot and assumes that you have a little background in
OpenTx. So, it may not be your best 1st video on OpenTx.
https://www.youtube.com/watch?v=KNXBwHwdFWU
Jerry
On Tue, Sep 7, 2021 at 11:27 AM Larry Carbaugh <larryn7luf@xxxxxxxxx>
wrote:
For several years I had my OpenTX Transmitter with all those switches and
buttons and was totally lost.
I just wish I had not bought it and put it in storage.
Then Thanks to Jerry, Tom and ORCA, I got it out.
After learning a little, this opentx software is wonderful and is so easy
to use.
There are so many youtube videos that will make it easy and here is one
to get you started.
Also Jerry, Tom, Max and myself are open to help if needed.
https://youtu.be/ye9Yaj_jUA8
--
Larry Carbaugh - N7LUF
Hansville, WA 98340
