RE: hp help...
- From: Chris Stephens <ChrisStephens@xxxxxxxxxx>
- To: "'oracle-l@xxxxxxxxxxxxx'" <oracle-l@xxxxxxxxxxxxx>
- Date: Fri, 16 Apr 2004 13:46:03 -0500
flounder:/=>dmesg
Apr 16 13:28
gate64: sysvec_vaddr = 0xc0002000 for 1 pages
NOTICE: autofs_link(): File system was registered at index 3.
NOTICE: nfs3_link(): File system was registered at index 5.
0 sba
0/0 lba
0/0/0/0 btlan3
0/0/1/0 c720
0/0/1/0.5 tgt
0/0/1/0.5.0 stape
0/0/1/0.6 tgt
0/0/1/0.6.0 sdisk
0/0/1/0.7 tgt
0/0/1/0.7.0 sctl
0/0/2/0 c720
0/0/2/0.6 tgt
0/0/2/0.6.0 sdisk
0/0/2/0.7 tgt
0/0/2/0.7.0 sctl
0/0/2/1 c720
0/0/2/1.6 tgt
0/0/2/1.6.0 sdisk
0/0/2/1.7 tgt
0/0/2/1.7.0 sctl
0/0/4/0 func0
0/0/4/1 asio0
0/1 lba
0/2 lba
0/4 lba
0/4/0/0 btlan5
0/5 lba
0/5/0/0 c720
0/5/0/0.7 tgt
0/5/0/0.7.0 sctl
0/5/0/1 c720
0/5/0/1.7 tgt
0/5/0/1.7.0 sctl
0/8 lba
0/8/0/0 PCItoPCI
0/8/0/0/4/0 btlan
0/8/0/0/5/0 btlan
0/8/0/0/6/0 btlan
0/8/0/0/7/0 btlan
0/10 lba
0/12 lba
0/12/0/0 td
td: claimed Tachyon TL/TS Fibre Channel Mass Storage card at 0/12/0/0
0/12/0/0.1 fcp
0/12/0/0.1.16.0.0 fcparray
0/12/0/0.1.16.0.0.0 tgt
0/12/0/0.1.16.0.0.0.0 sdisk
0/12/0/0.1.16.0.0.0.1 sdisk
0/12/0/0.1.16.0.0.0.4 sdisk
0/12/0/0.1.16.0.0.0.5 sdisk
0/12/0/0.1.16.0.0.2 tgt
0/12/0/0.1.16.0.0.2.6 sdisk
0/12/0/0.1.16.0.0.3 tgt
0/12/0/0.1.16.0.0.3.1 sdisk
0/12/0/0.1.16.0.0.3.2 sdisk
0/12/0/0.1.16.255.0 fcpdev
0/12/0/0.1.16.255.0.0 tgt
0/12/0/0.1.16.255.0.0.0 sctl
0/12/0/0.1.21.255.0 fcpdev
0/12/0/0.1.21.255.0.0 tgt
0/12/0/0.1.21.255.0.0.1 stape
0/12/0/0.1.21.255.0.0.2 stape
0/12/0/0.1.24.255.0 fcpdev
0/12/0/0.1.24.255.0.0 tgt
0/12/0/0.1.24.255.0.0.0 stape
0/12/0/0.1.24.255.0.0.1 stape
0/12/0/0.1.25.255.0 fcpdev
0/12/0/0.1.25.255.0.0 tgt
0/12/0/0.1.25.255.0.0.1 stape
0/12/0/0.1.25.255.0.0.2 stape
1 sba
1/0 lba
1/2 lba
1/4 lba
1/4/0/0 td
td: claimed Tachyon TL/TS Fibre Channel Mass Storage card at 1/4/0/0
1/4/0/0.1 fcp
1/4/0/0.1.16.0.0 fcparray
1/4/0/0.1.16.0.0.0 tgt
1/4/0/0.1.16.0.0.0.0 sdisk
1/4/0/0.1.16.0.0.0.1 sdisk
1/4/0/0.1.16.0.0.0.4 sdisk
1/4/0/0.1.16.0.0.0.5 sdisk
1/4/0/0.1.16.0.0.2 tgt
1/4/0/0.1.16.0.0.2.6 sdisk
1/4/0/0.1.16.0.0.3 tgt
1/4/0/0.1.16.0.0.3.1 sdisk
1/4/0/0.1.16.0.0.3.2 sdisk
1/4/0/0.1.16.255.0 fcpdev
1/4/0/0.1.16.255.0.0 tgt
1/4/0/0.1.16.255.0.0.0 sctl
1/8 lba
1/10 lba
1/12 lba
1/12/0/0 c720
1/12/0/0.7 tgt
1/12/0/0.7.0 sctl
1/12/0/1 c720
1/12/0/1.7 tgt
1/12/0/1.7.0 sctl
36 pbc
37 processor
44 pbc
45 processor
192 memory
btlan3: Initializing 10/100BASE-TX card at 0/0/0/0....
System Console is on the Built-In Serial Interface
btlan: Initializing 10/100BASE-TX card at 0/8/0/0/4/0....
btlan: Initializing 10/100BASE-TX card at 0/8/0/0/5/0....
btlan: Initializing 10/100BASE-TX card at 0/8/0/0/6/0....
btlan: Initializing 10/100BASE-TX card at 0/8/0/0/7/0....
btlan5: Initializing 10/100BASE-TX card at 0/4/0/0....
Logical volume 64, 0x3 configured as ROOT
Logical volume 64, 0x2 configured as SWAP
Logical volume 64, 0x2 configured as DUMP
Swap device table: (start & size given in 512-byte blocks)
entry 0 - major is 64, minor is 0x2; start = 0, size = 4194304
Dump device table: (start & size given in 1-Kbyte blocks)
entry 0 - major is 31, minor is 0x16000; start = 88928, size =
097152
Starting the STREAMS daemons-phase 1
Create STCP device files
Starting the STREAMS daemons-phase 2
B2352B/9245XB HP-UX (B.11.00) #1: Wed Nov 5 22:38:19 PST 1997
Memory Information:
physical page size = 4096 bytes, logical page size = 4096 bytes
Physical: 6291456 Kbytes, lockable: 5688328 Kbytes, available: 5797760
bytes
...see anything?
-----Original Message-----
From: Mladen Gogala [mailto:mladen@xxxxxxxxxxxxxxx]
Sent: Friday, April 16, 2004 11:03 AM
To: oracle-l@xxxxxxxxxxxxx
Subject: Re: hp help...
Do you have sufficient amount of processes available on the box (NPROC
parameter
in SAM)? Swap can be added, and as far as I can remeber, HP-UX has mkswap
command
that will create a swap file of certain size. It's very hard to help you out
without actually seeing the messages. Can you execute "dmesg" and post the
result?
On 04/16/2004 11:51:59 AM, Chris Stephens wrote:
> Earlier this week I attempted to install 9i on a production HP server =
> (after
> doing this a number of times elsewhere). The installer initially =
> wasn't
> able to launch due to lack of tmp space. So I got the sys admin to =
> clean
From what I read so far, you may not want to kill Bill, but you may
want to get rid of your SA, by firing him or by firing at him.
--
Mladen Gogala
Oracle DBA
----------------------------------------------------------------
Please see the official ORACLE-L FAQ: http://www.orafaq.com
----------------------------------------------------------------
To unsubscribe send email to: oracle-l-request@xxxxxxxxxxxxx
put 'unsubscribe' in the subject line.
--
Archives are at //www.freelists.org/archives/oracle-l/
FAQ is at //www.freelists.org/help/fom-serve/cache/1.html
-----------------------------------------------------------------
----------------------------------------------------------------
Please see the official ORACLE-L FAQ: http://www.orafaq.com
----------------------------------------------------------------
To unsubscribe send email to: oracle-l-request@xxxxxxxxxxxxx
put 'unsubscribe' in the subject line.
--
Archives are at //www.freelists.org/archives/oracle-l/
FAQ is at //www.freelists.org/help/fom-serve/cache/1.html
-----------------------------------------------------------------
Other related posts:
