An optacon III ergonomic mechanical question if I may in order to make it
marketable, accompanied by a pre-amble for its context:
As things stand now, the optacon IIIâs display has evolved from a mere dumb
display (a mere vibrotactile output device which feels something like a fat
domino)) to a stand-alone display into which the nifty camera and power and
whatever can be plugged. This way, the camera and the smart-display can be
mechanically connected to form a crude one-handed optacon with room for
improvement, or they can be used each in one hand as we traditionally have
done. Although I am still really concerned about the power monster, and Iâm
working with tuflon and a few other experimental strategies to reduce power
consumption, Iâm not worried about a vibrotactile display. We have a
two-handed optacon---even in its basic formâand since Mr. Noel Runyan
recommended a one-handed option, we now have that as well. So be it. Having
said these things, it is my âsenseâ or belief that a simple up-to-date
small optacon simply will not sell, take wings and fly. no matter the zeal of
present optacon users. I could be wrong, given proper education of blind
people, especially children, but that is how it looks realistically from this
userâs vantage. If no new optacon users come along, ten years from now will
show a very different optacon-user landscape compared to today. Therefore,
from this line of reasoning, I have combined the basic optacon III with a
small, standard computer (around the size of a Braille Sense U2 32-cell model;
smaller than a Braille Lite 40) and a built-in 32-cell braille display (which
unfortunately and to my chagrin and sincere regret and wish for the contrary is
proprietary at this time, and this goes against Every sentiment and wish within
me to have it so!). The braille display can be built by hand for a few hundred
dollars, and likely would be less costly if produced by automation and in
numbers greater than 99 per batch. At this point, the optacon IIIâs display
fits nicely behind the spacebar and between dots 1 and 4 of the deviceâs
perkins keyboard. So, along one long edge at the front is the 32-cell display
(built with banks of 4 braille cells per bank, smaller than bimorph-based
cells), and the optacon IIIâs display is right at the back edge, between dots
1 and 4, and therefore in the middle of the edge. The device has as many
useful functions as any hand-held computer with a robust braille display and
good accessibility. However, if the optacon IIIâs vibrotactile display is
built into the hand-held computer with its inexpensive and robust braille
display, several questions come to mind for which I do need feedback.
1. Although the smart display could be made mechanically to slide in and out
of its place, like the old PCMCIA cards, when the display is removed and
connected to its camera, a rectangle-like void about the size of a fat domino
would be left in the hand-held computer with its braille display. So, what to
do in order to prevent this mechanical oddity or use the empty display space?
2. Is there a better way to design the mechanics of the device?
The only reason why Iâm evolving toward solidifying the optacon IIIâs
design as part of an encompassing system is that on its own, a new optacon
likely would not sell, so other things must be added. Likely enough, most
people would use the braille display and computer more often than the optacon
IIIâs vibrotactile display. The only two reasons I can see for being able to
detach the optacon IIIâs display from the hand-held computer are:
1. To connect it to its camera for one-handed use.
2. To use it as a stand-alone, small, versatile optacon.
Otherwise, and if a stand-alone optacon would indeed sell, this stuff about a
hand-held computer with a built-in braille display would not be an issue.
If the smart display were merely tacked onto one end or the other of the
hand-held computer, that would solve nothing and would make ergonomic design
and use even worse.
I doubt a market exists for two optacon III versions: a one-handed optacon and
a two-handed optacon, and also not likely for a simple, stand-alone optacon
III. If I had my way, I would build the detachable optacon III into an
encompassing system, and find a good use for that fat domino void, or find a
way so it doesnât happen in the first place.
So, please, any thoughts and suggestions? No doubt the mechanical solution for
this is simple and straightforward.
Chuck
---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus
to view the list archives, go to:
www.freelists.org/archives/optacon-l
To unsubscribe at any time, just send a message to:
optacon-l-request@xxxxxxxxxxxxx with the word "unsubscribe" (without the
quotes) in the message subject.
Tell your friends about the list. They can subscribe by sending a message to:
optacon-l-request@xxxxxxxxxxxxx with the word "subscribe" (without the quotes)
in the message subject.