Use "No More Nails" sticks like s--t to a blanket, or any thing to concrete. P. S. or "Grabs Like Nails" is similar. ----- Original Message ----- From: "Ron Head" <ron.head@xxxxxxxxxxxxx> To: <modeleng@xxxxxxxxxxxxx> Sent: Monday, November 22, 2004 11:16 PM Subject: [modeleng] Re: Workshops Hi Tony My main workshop is actually a concrete garage and for years I've been considering lining the inside with some sort of insulation, however the difficulty of attaching anything to the concrete has put me off. It's difficult enough to attach conduits and suchlike, the concrete really takes some drilling. Regards Ron Head ----- Original Message ----- From: "Tony Wells" <oaksfield@xxxxxxxxxxxxxxx> To: <modeleng@xxxxxxxxxxxxx> Sent: Monday, November 22, 2004 11:30 AM Subject: [modeleng] Re: Workshops > Tim, a friend of mine has just built a new workshop from scratch, using > timber stud construction with insulation between the inner and outer > skins. > Apparently, whilst it is very cosy and snug, his attitude is "never again" > due to the unexpectedly large amount of work, and therefore time, > involved. > It is 14' x 13' though. Why not go for a pre-cast concrete shed, from one > of > the garage suppliers, and line the inside with some form of insulation? > Just > remember to run all of your electric cables round first though. > > Tony Wells. > > > ----- Original Message ----- > From: "Tim Rickard" <the_viffer@xxxxxxxxxxx> > To: <modeleng@xxxxxxxxxxxxx> > Sent: Monday, November 22, 2004 10:49 AM > Subject: [modeleng] Workshops > > >> We are considering some building works at Rickard Heights. >> SNIP > > > MODEL ENGINEERING DISCUSSION LIST. > > To UNSUBSCRIBE from this list, send a blank email to, > modeleng-request@xxxxxxxxxxxxx with the word "unsubscribe" in the subject > line. MODEL ENGINEERING DISCUSSION LIST. To UNSUBSCRIBE from this list, send a blank email to, modeleng-request@xxxxxxxxxxxxx with the word "unsubscribe" in the subject line. MODEL ENGINEERING DISCUSSION LIST. To UNSUBSCRIBE from this list, send a blank email to, modeleng-request@xxxxxxxxxxxxx with the word "unsubscribe" in the subject line.