[modeleng] Re: Tr: Re: Steam engine RPM ?
- From: "alan Stepney" <alan@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx>
- To: <modeleng@xxxxxxxxxxxxx>
- Date: Wed, 7 Sep 2005 02:40:01 +0100
Tel, the reason I went for the maximum speed is that, at 1.5 bore and 2.25
stroke it may well be a working, as opposed to display, engine.
It could generate a reasonable power.
I agree that for best viewing, a nice slow speed is best.
Alan
----- Original Message -----
From: "Terry Lane" <tel@xxxxxxxxxxx>
To: <modeleng@xxxxxxxxxxxxx>
Sent: Wednesday, September 07, 2005 2:24 AM
Subject: [modeleng] Re: Tr: Re: Steam engine RPM ?
You sure don't Al, if it was mine I'd be aiming for perhaps half of AJ's
suggested figures
> If this is a working display model, you don't want it
> operating so fast that the workings of the motion are
> blurred, do you?
>
> Al Messer
MODEL ENGINEERING DISCUSSION LIST.
To UNSUBSCRIBE from this list, send a blank email to,
modeleng-request@xxxxxxxxxxxxx with the word "unsubscribe" in the subject line.
Other related posts:
