[modeleng] Re: Tr: Re: Steam engine RPM ?
- From: Allen Messer <al_messer@xxxxxxxxx>
- To: modeleng@xxxxxxxxxxxxx
- Date: Tue, 6 Sep 2005 18:41:44 -0700 (PDT)
AJ--late night, or early morning?
Al, the nosey one(been hanging around Jesse too long)
--- alan Stepney <alan@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx>
wrote:
> Tel, the reason I went for the maximum speed is
> that, at 1.5 bore and 2.25
> stroke it may well be a working, as opposed to
> display, engine.
> It could generate a reasonable power.
>
> I agree that for best viewing, a nice slow speed is
> best.
>
> Alan
> ----- Original Message -----
> From: "Terry Lane" <tel@xxxxxxxxxxx>
> To: <modeleng@xxxxxxxxxxxxx>
> Sent: Wednesday, September 07, 2005 2:24 AM
> Subject: [modeleng] Re: Tr: Re: Steam engine RPM ?
>
>
> You sure don't Al, if it was mine I'd be aiming for
> perhaps half of AJ's
> suggested figures
>
>
>
> > If this is a working display model, you don't want
> it
> > operating so fast that the workings of the motion
> are
> > blurred, do you?
> >
> > Al Messer
>
> MODEL ENGINEERING DISCUSSION LIST.
>
> To UNSUBSCRIBE from this list, send a blank email
> to,
> modeleng-request@xxxxxxxxxxxxx with the word
> "unsubscribe" in the subject line.
>
______________________________________________________
Click here to donate to the Hurricane Katrina relief effort.
http://store.yahoo.com/redcross-donate3/
MODEL ENGINEERING DISCUSSION LIST.
To UNSUBSCRIBE from this list, send a blank email to,
modeleng-request@xxxxxxxxxxxxx with the word "unsubscribe" in the subject line.
Other related posts:
