Hello Cliff. Thanks for the information. Best regards Frank > From: cd_ward@xxxxxxxxx > To: modeleng@xxxxxxxxxxxxx > Subject: [modeleng] Re: Stuart No 1-reversing gear and instruction booklets... > Date: Fri, 14 Sep 2012 08:27:17 -0400 > > Hello Frank: > > The booklet providing instructions for the 10V will be helpful for you on > the Stuart No 1, and may provide all the instruction you need with respect > to the reversing gear...there is a chapter in the 10V booklet about > reversing gear. > > Also remember the Stuart booklet about the No 1 is quite old, and some of > the techniques are now typically done differently....it should be followed > with caution. > > Best Regards, > Cliff > > Cliff Ward > Cary, North Carolina > USA > > > -----Original Message----- > From: modeleng-bounce@xxxxxxxxxxxxx [mailto:modeleng-bounce@xxxxxxxxxxxxx] > On Behalf Of Frank Lennon > I have a copy of the booklet but unfortunately it does not include the > reversing kit! > Frank > ...(snip) > > > MODEL ENGINEERING DISCUSSION LIST. > > To UNSUBSCRIBE from this list, send a blank email to, > modeleng-request@xxxxxxxxxxxxx with the word "unsubscribe" in the subject > line. MODEL ENGINEERING DISCUSSION LIST. To UNSUBSCRIBE from this list, send a blank email to, modeleng-request@xxxxxxxxxxxxx with the word "unsubscribe" in the subject line.