[modeleng] Re: Stuart No 1-reversing gear and instruction booklets...
- From: "Cliff" <cd_ward@xxxxxxxxx>
- To: <modeleng@xxxxxxxxxxxxx>
- Date: Fri, 14 Sep 2012 08:27:17 -0400
Hello Frank:
The booklet providing instructions for the 10V will be helpful for you on
the Stuart No 1, and may provide all the instruction you need with respect
to the reversing gear...there is a chapter in the 10V booklet about
reversing gear.
Also remember the Stuart booklet about the No 1 is quite old, and some of
the techniques are now typically done differently....it should be followed
with caution.
Best Regards,
Cliff
Cliff Ward
Cary, North Carolina
USA
-----Original Message-----
From: modeleng-bounce@xxxxxxxxxxxxx [mailto:modeleng-bounce@xxxxxxxxxxxxx]
On Behalf Of Frank Lennon
I have a copy of the booklet but unfortunately it does not include the
reversing kit!
Frank
...(snip)
MODEL ENGINEERING DISCUSSION LIST.
To UNSUBSCRIBE from this list, send a blank email to,
modeleng-request@xxxxxxxxxxxxx with the word "unsubscribe" in the subject line.
Other related posts:
