[modeleng] Re: Heinrici
- From: Terry Lane <tel.47@xxxxxxxxxxx>
- To: modeleng@xxxxxxxxxxxxx
- Date: Mon, 14 Nov 2011 05:41:54 +1100
Coming along nicely!
On 14/11/2011 5:27 AM, stepney wrote:
> Progress to date.
>
> http://www.alanstepney.info/he2s.jpg
>
> Back row, L to R:
> Displacer (needs a clean), two flywheels, two bearing standards
>
> Main casting, crank pin, piston yoke, piston, power cylinder.
>
> Displacer con rod and shaft.
>
> At the front is a marked out piece of steel that will be the power
> crankshaft.
> I suspect that there was a casting for it, but I cant find it, so am
> having to make one.
>
> All the other pins, bolts etc are made as are the cooling water
> fittings. The latter still need the pipes, and I plan to have pumped
> water, so will need to make a pump.
>
> The biggest item still to make is the "furnace" on which the engine stands.
>
> MODEL ENGINEERING DISCUSSION LIST.
>
> To UNSUBSCRIBE from this list, send a blank email to,
> modeleng-request@xxxxxxxxxxxxx with the word "unsubscribe" in the subject
> line.
>
>
MODEL ENGINEERING DISCUSSION LIST.
To UNSUBSCRIBE from this list, send a blank email to,
modeleng-request@xxxxxxxxxxxxx with the word "unsubscribe" in the subject line.
Other related posts:
