[modeleng] Re: Gear wear
- From: "alanjstepney" <alan@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx>
- To: <modeleng@xxxxxxxxxxxxx>
- Date: Wed, 11 Aug 2004 16:43:38 +0100
It was well packed with grease, so no lubrication problems.
The material appears to be nylon, but could be something else.
Whatever it is, it appears unworn, unlike the motor shaft which is
knackered.
alan@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
www.alanstepney.info
Model Engineering, Steam Engine, and Railway technical pages.
----- Original Message -----
From: "R.L. Roebuck" <rlr20@xxxxxxxxxxxxx>
To: <modeleng@xxxxxxxxxxxxx>
Sent: Wednesday, August 11, 2004 1:31 PM
Subject: [modeleng] Re: Gear wear
Was the gear pair lubricated with anything? Is the nylon gear actually
nylon, or is it some kind of glass or ceramic filled plastic?
Rich.
MODEL ENGINEERING DISCUSSION LIST.
To UNSUBSCRIBE from this list, send a blank email to,
modeleng-request@xxxxxxxxxxxxx with the word "unsubscribe" in the subject line.
Other related posts:
