[MoAccess] AW: Get empty MIDI tracks
- From: "Benjamin Blatter" <b.blatter@xxxxxxxxxx>
- To: <MoAccess@xxxxxxxxxxxxx>
- Date: Mon, 9 Jun 2008 21:00:00 +0200
Unfortunatelly I don't understand this idea fully. Perhaps my limited
English skills *g*
but I will check the list archives.
Thanks a lot
Benjamin
> -----Ursprungliche Nachricht-----
> Von: moaccess-bounce@xxxxxxxxxxxxx
> [mailto:moaccess-bounce@xxxxxxxxxxxxx]Im Auftrag von Bryan Smart
> Gesendet: Montag, 9. Juni 2008 19:57
> An: MoAccess@xxxxxxxxxxxxx
> Betreff: Re: [MoAccess] Get empty MIDI tracks
>
>
> That is the best way to do it that doesn't involve a lot of work.
>
> The real best way to do it is to save the Motif's mix setup as part of
> the Sonar project. You save a blank/initialized version of the mix with
> your Sonar "normal.cwt" template. That way, when you open a new project,
> Sonar sets the Motif to a blank mixing setup.
>
> If you work this way, though, you have to dump the Motif's mixing setup
> back into the Sonar project each time you make a change before saving a
> Sonar project. If you don't, the next time you load the Sonar project,
> all of your mixing settings will be wiped out. I've previously posted a
> Sonar dump request macro that can automatically request the mix from the
> Motif. Check the list archives.
>
> John Melas's editors also have an XSSync plug in that can recall the
> mixing setup of a Sonar project. That should do the same sort of thing,
> and will probably be a better option for you until I get all of my
> methods documented.
>
> Bryan
>
> -----Original Message-----
> From: moaccess-bounce@xxxxxxxxxxxxx
> [mailto:moaccess-bounce@xxxxxxxxxxxxx] On Behalf Of Benjamin Blatter
> Sent: Monday, June 09, 2008 1:28 PM
> To: MoAccess@xxxxxxxxxxxxx
> Subject: [MoAccess] Get empty MIDI tracks
>
> Hi everyone
>
> Before I open a new MIDI project in Sonar I always turn the dial once on
> the Motif XS to get empty tracks. Otherwise I could get wrong sounds. Is
> there a way, Sonar could do this automatically when I open a new
> project? It would be useful, when I use the XS as control surface.
> Because the dial has another function in this mode. Or have I to switch
> everytime between normal mode and surface mode to get empty tracks?
>
> Thanks!
> Benjamin
>
>
>
> > -----Ursprungliche Nachricht-----
> > Von: moaccess-bounce@xxxxxxxxxxxxx
> > [mailto:moaccess-bounce@xxxxxxxxxxxxx]Im Auftrag von Bryan Smart
> > Gesendet: Sonntag, 8. Juni 2008 12:46
> > An: MoAccess@xxxxxxxxxxxxx
> > Betreff: Re: [MoAccess] MIDI file playback & editing
> >
> >
> > Hi Grant.
> >
> > I don't own a Motif ES anymore, but the ES is supposed to be able to
> > load standard type 1 MIDI files into its linear sequencer (song mode).
> > You can also save your own Motif songs as SMF type 0 files.
> >
> > You should go into song mode, find an empty song, press file, press F3
>
> > [load], set the type to song, and press the right arrow to move to the
>
> > files list. Now, you'll be in the file list, and the MIDI files on
> > your storage device will appear. You might need sighted assistance to
> > select the specific file to load. You need to check out the ES
> > reference to know the order that the file type control's settings are
> > in. Setting type to song is something like the 14th or 18th option.
> >
> > Hopefully, you'll get a response from one of the current ES owners. If
>
> > not, though, what I've told you should get you moving in the right
> > direction.
> >
> > Bryan
> >
> >
> > -----Original Message-----
> > From: moaccess-bounce@xxxxxxxxxxxxx
> > [mailto:moaccess-bounce@xxxxxxxxxxxxx] On Behalf Of Grant Zolninger
> > Sent: Saturday, June 07, 2008 9:41 PM
> > To: Motif Access
> > Subject: [MoAccess] MIDI file playback & editing
> >
> > Howdy,
> >
> > I have a Motif ES. Is it possible to take a MIDI file (.mid) that
> > someone else has created and somehow load it in to the Motif and or
> > mix editor to assign patches other than GM midi patches? I am hoping
> > to use some MIDI files to create .wav samples using voices from the
> > Motif that can then be triggered in performance mode in real time. The
>
> > midi files have more information than I want to use as samples and I
> > am thinking that I should be able to get each midi track seperatly and
>
> > mute what I do not need. Thanks for any help you may provide.
> >
> > Grant
> >
> >
> > For links to all Motif info for blind owners, visit www.MoAccess.info.
> > To change your list options and view archives for the MoAccess list,
> > visit www.freelists.org/list/moaccess.
> >
> > For links to all Motif info for blind owners, visit www.MoAccess.info.
> > To change your list options and view archives for the MoAccess list,
> > visit www.freelists.org/list/moaccess.
>
>
> For links to all Motif info for blind owners, visit www.MoAccess.info.
> To change your list options and view archives for the MoAccess list,
> visit www.freelists.org/list/moaccess.
>
> For links to all Motif info for blind owners, visit www.MoAccess.info.
> To change your list options and view archives for the MoAccess
> list, visit www.freelists.org/list/moaccess.
For links to all Motif info for blind owners, visit www.MoAccess.info.
To change your list options and view archives for the MoAccess list, visit
www.freelists.org/list/moaccess.
Other related posts:
- » [MoAccess] AW: Get empty MIDI tracks
