9312 should only need 200mA on core, so 1.5A will more than do. 3v3 more difficult to estimate, but 1A5 should be fine. What PHT are you using - they are thirsty, and if you've found one that runs off 3V3 you need to be careful > *Subject:* [linux-cirrus] Guide me please > *From:* Nabil shaukat <nabilshaukat@xxxxxxxxx> > *To:* linux-cirrus@xxxxxxxxxxxxx > *Date:* Wed, 26 Jan 2005 09:33:06 -0800 (PST) > > Hi Dear , > > I want to use LT1963 regulator which 1.5 A rating on 3.3V > and 1.8V in SMD Pakage SOT223 , Is it suitable for my EP9312 Data > Aqusation card which contain 2 SDRAM 2 Flash Ethernel chip , Compact > Flash card . Please guide me is this regulator is suitable for my > design? Or Please tell any SMD regulator which will work good for my > design. > > Best Regards > > Nabil Shaukat > > --------------------------------- > Do you Yahoo!? > Read only the mail you want - Yahoo! Mail SpamGuard. > > > > David Collier Postmaster. Dexdyne Ltd - see www.Dexdyne.com and www.netrixdemo.com