Many thanks Shel,
I'll take a look there.
Bestest regards from rainy Hannover.
Lots of D's today: Damp, dull, dark, drizzly, dreary and FC (which I
will translate as "freezing" cold)
Douglas
Shel Belinkoff wrote:
Hi Doug ...
The Nikonian site has provided some helpful solutions to problems I had with the scanner.
http://www.nikonians.org/
You may have to join to participate in discussions and to ask questions, but you can read messages without joining. The scanner section can be found here:
http://www.nikonians.org/cgi-bin/dcforum/dcboard.cgi?az=list&forum=DCForumID 81&conf=DCConfID9
or by navigating from the main page.
Good luck!
Shel
ratio.[Original Message] From: Douglas Sharp <douglas.sharp@xxxxxx> To: <leica@xxxxxxxxxxxxx> Date: 2/7/2006 7:55:38 AM Subject: Re: Nikon Coolscan V ED question
Hi Shel,
it works perfectly at 1024 x 768, 1600 x 1200 both have an aspect ratio of 1:1.33333. It didn't work at 1920 x 1080 (1:1.777)
This is on a LaCie 19" CRT - it seems that it needs a certain aspect
recallI've mailed Nikon Support too and hope to get an answer soon Douglas
Shel Belinkoff wrote:
Hi Doug,
At what resolutions are you having problems. I've the same scanner and
will take a look to see if I can duplicate your problem. I seem to
that Scan 4.0 requires/suggests an ideal resolution, but I could be confusing that with another program.
BTW, mine works just fine with 1024x768 on a 19-inch monitor
Shel
[Original Message]
From: Douglas Sharp
Has anyone noticed that the tool palette in Nikon Scan 4.0 doesn't appear on screen when certain screen resolutions are set?
If so, does any one know the settings it will work with?
TIA
Douglas
========================================================= To Unsubscribe: Send email to leica-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field. The acknowledgment that you then receive MUST be replied to per instructions. You may also log in to the Web interface to unsubscribe.
========================================================= To Unsubscribe: Send email to leica-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field. The acknowledgment that you then receive MUST be replied to per instructions. You may also log in to the Web interface to unsubscribe.