Re: Jobo Processors
- From: Jim Brick <jim@xxxxxxxxx>
- To: leica@xxxxxxxxxxxxx
- Date: Thu, 17 Feb 2005 11:31:56 -0800
At 07:14 PM 2/16/2005, jrofcbr@xxxxxxxxxxx wrote:
JOBO Autolab 1500 Auto Processor / Jobo CPP-2 Table Top Processor w/ Lift
Does anyone have any experience with either of these processors?
If so, which one is prefered?
Thanks,
Ollie Riley
I have, and use a lot, a JOBO ATL-2400. Marvelous machine. The automatic
sequencing of a process is a great time saver as I can do other things
while either film or prints are processing. I'd opt for the ATL-1500 if all
you want to process is film.
However... if you want to process prints larger than 8x10, you'll have to
go for the CPP-2.
http://www.jobo-usa.com/instructions/instructions_manual_cpa-2_cpp-2_10.htm
Jim
=========================================================
To Unsubscribe: Send email to leica-request@xxxxxxxxxxxxx with 'unsubscribe' in
the Subject field. The acknowledgment that you then receive MUST be replied to
per instructions. You may also log in to the Web interface to unsubscribe.
Other related posts:
