On Wednesday, July 9, 2003, at 01:03 PM, Michael Rossberg wrote: > hey, > >> Ok, i have a linksys WPC11v3 card, which i installed the >> wirelessdriver >> driver for, then i installed kismac with patch. I then changed the MAC >> on the card... This caused an instant OS problem requiring a >> reboot.... >> Any time I inserted the card, with new MAC, I would instantly be >> forced >> to do a hard reboot... I solved this by running kismac, and hten >> inserting the card, and changing the mac to the factory setting. >> Worked >> just fine. I was able to recreate the problem using variations of >> this.. any time OSX tried to load the card, the comp required a hard >> reboot... At no time durring this was i able to "re-inject" packets... >> I got a " i am not happy" message that appeared that only one card was >> seen by kismac...... > > unfortunately i dont own a prism 2.5 card, so that i can test you > configuration. is there anybody who can confirm this problem? > for packet injection set your driver to viha. > >> I am running kismac 0.05b, ( same results under what ever is listed as >> stable on maintaners site... i move to "untested" to see if this has >> been addressed) >> >> airport card (not extreme) >> >> OS 10.2.6 >> >> linksys WPC11v3 card ( supposedly a prism2 card, and seems to behave >> like one in most respects) >> >> towards the end of this, i managed to cause a reboot to be needed >> while >> "wirelessMAC" was running... now i cannot run the program to change >> the >> mac to factory...... I get a " program terminated" error... even after >> i removed, reinstalled the program..... > > can you send me a log of this crash? > > mick > > > unfortunatly, no, i cannot.. I managed to fix it by removing the sourceforge drivers, and then installing, and then installing kismac.... so that is fixed..... thanks for the help, though