[kismac] a bug i may have found
- From: Chapin's Bulk <chapinsbulk@xxxxxxxxxxx>
- To: kismac@xxxxxxxxxxxxx
- Date: Tue, 8 Jul 2003 07:41:23 -0500
Ok, i have a linksys WPC11v3 card, which i installed the wirelessdriver
driver for, then i installed kismac with patch. I then changed the MAC
on the card... This caused an instant OS problem requiring a reboot....
Any time I inserted the card, with new MAC, I would instantly be forced
to do a hard reboot... I solved this by running kismac, and hten
inserting the card, and changing the mac to the factory setting. Worked
just fine. I was able to recreate the problem using variations of
this.. any time OSX tried to load the card, the comp required a hard
reboot... At no time durring this was i able to "re-inject" packets...
I got a " i am not happy" message that appeared that only one card was
seen by kismac......
I am running kismac 0.05b, ( same results under what ever is listed as
stable on maintaners site... i move to "untested" to see if this has
been addressed)
airport card (not extreme)
OS 10.2.6
linksys WPC11v3 card ( supposedly a prism2 card, and seems to behave
like one in most respects)
towards the end of this, i managed to cause a reboot to be needed while
"wirelessMAC" was running... now i cannot run the program to change the
mac to factory...... I get a " program terminated" error... even after
i removed, reinstalled the program.....
Thanks for the GREAT work on this project... Let me know if i can help
in any way....
jeff chapin
Other related posts:
