> *From:* Mike Lucas <mhlucas@xxxxxxxxxxxx> > *To:* jhb@xxxxxxxxxxxxx > *Date:* Mon, 31 Dec 2007 13:03:30 +0000 > > Peter > > Unfortunately this doesn't help. When I look at the yoke in > Control Panel >> Gaming options I can see that X deflection > (ailerons) is full scale to the left but barely 50% to the right; > similarly for Y deflection (elevator) - only 50% up, plus the > yoke's 'dead' position gives decidedly down elevator. This can > only be corrected if I can use the GUI calibration button - but > this is not available to me as I cannot load any Saitek drivers (XP > only). > > Mike L > > > I assume you have booted with the Saitek connected, rather than connecting the saitek after boot up. I find it makes a big difference to what works and what doesn't. If its FS9 then it should calibrate using the FS9 calibration option. Mine was drifting left until I calibrated it. I rarely run FSX but I think it works OK in that from memory. Saitek are pretty good at responding to email queries. Peter