Sorry Frank
I run my computers through an audio mixer into broadcast monitors
(LS35A's)
This allows me maximum flexibility across the range of audio programs I
use.
Output is from differing audio cards depending on the machine, but
obviously is interfaced from the jack sockets.
The mixer allows numerous monitoring options (sends, returns) and I
couple this with a 4 ch Headphone amp.
Each of these channels have the standard stereo controls plus
individual aux ins.
I looked at this unit as a USB to jack converter which may "fool"
Vista into thinking there was another card, or USB headphone.
I could then separate the cockpit to the monitors and strip out ATC
via DI to the Headphone array.
Your setup must utilise USB cans to be able to do this.
best wishes
Kev
On 4/4/2010 14:16:43, jhb@xxxxxxxxxxxxx wrote:
> Kevin
>
> I have separate sound and voice on my setup, just go into FSX sound
> options
> and select sound/speakers, voice/headphones, done.
> And that with just 1 sound card fitted
>
> Frank
> ----- Original Message -----
> From: "Kev Townsend" <175@xxxxxxxxxxxx>
> To: <jhb@xxxxxxxxxxxxx>
> Sent: Sunday, April 04, 2010 7:03 AM
> Subject: [jhb] Re: Audio solution
>
>
> >I spotted this device in a search recently and wondered if this may
> > resolve as issue with FS sounds.
> >
> > In order to separate Cockpit and ATC sounds, between speakers and
> > headset, you needed either a machine with 2 sound cards, or a USB
> headset.
> > I wonder if this device only $12 would enable me to separate
> audio
> > streams and use my existing headphone setup, a 4 way headphone
> amp?
> >
> > http://tekgems.com/Products/la-music01.htm
> >
> > best wishes
> >
> > Kev
> >
> >
>
>
>
--------------------------------------------------------------------------------
>
>
>
> No virus found in this incoming message.
> Checked by AVG - www.avg.com
> Version: 9.0.800 / Virus Database: 271.1.1/2787 - Release Date: 04/03/10
> 07:32:00
