Re: routing jaws to particular sound card
- From: "Jarrod Jicha" <JamminJerry@xxxxxxxxx>
- To: <jfw@xxxxxxxxxxxxx>
- Date: Tue, 15 Feb 2005 22:35:10 -0500
you don't need that eliquance file
if you are using jaws 5 or above.
----- Original Message -----
From: "david the wild-thing" <d.h.whitehead@xxxxxxxxxxxx>
To: <jfw@xxxxxxxxxxxxx>
Sent: Tuesday, February 15, 2005 10:02 PM
Subject: Re: routing jaws to particular sound card
Hi, Joy;
are you talking about using 2 different sound cards?
if so;
2 sound cards.
JAWS for Windows
Category: Synthesizers
Question:
I have two sound cards on my computer. How do I make sure JAWS uses the one
I want?
Answer:
Many JAWS users who also use music or audio production software want JAWS
and Eloquence to speak through one sound card, while using the other for
their
production work. To do this, you need to edit a file called JFW.ini and
install the updated Eloquence Speech driver in the accompanying zip file.
Editing the jfw.ini file:
1. Using My Computer or Windows Explorer, browse your hard drive to the
currently running version of JAWS and find the jfw.ini file in that folder.
2. Press ENTER to open.
3. You should find some lines that read:
Synth1Name=eloq
Synth1LongName=Eloquence for JAWS
Synth1Driver=eloq
The number doesn't matter, it may be 1, 2, or 3, but it must be the same for
all entries for Eloquence.
4. Add the following line after the driver line: Synth1Port=SB Live! Wave
Device Of course, you need to make sure that the synth number matches the
other
lines, so that if the Driver line read:
Sytn3Driver=eloq
Then the port line would read:
Synth3Port=SB Live! Wave Device
The text after the = sign in the Port line comes from Control Panel/Sound &
Multimedia/Audio tab It must be one of the entries that can be chosen for
Preferred
Playback device.
5. Save your changes and exit Notepad.
Now you must install the updated driver.As long as JAWS is running and
speaking through Eloquence, eloq.jls cannot be simply overwritten when
unzipping
the file. You will need to switch to NoSpeech or MS SAPI to get the eloq.jls
to overwrite properly.
1. Download the file from
ftp://ftp.freedomscientific.com/users/hj/private/eloq.zip
2. Unzip the zip file into the root of the active JAWS directory where you
made the change to the jfw.ini file.
3. Restart JAWS and it should now be speaking from the sound card you
wanted.
4. If not, make sure the entries are correct in the jfw.ini file and that
your sound card is indeed installed correctly. Most audio and music
production
software allows you to select a sound device for it as well, so it can use
one sound card while JAWS uses another.
http://www.freedomscientific.com/fs_support/BulletinView.cfm?QC=432
----- Original Message -----
From: "Joy Tilton" <joyctilton@xxxxxxxxxxx>
To: <jfw@xxxxxxxxxxxxx>
Sent: Tuesday, February 15, 2005 9:47 PM
Subject: routing jaws to particular sound card
> Trying to get jaws to go to a particular sound card at start up. How do
> I=
> do that?
>
> Joy C. Tilton
> mailto:joyctilton@xxxxxxxxxxx
> msn: joyctilton@xxxxxxxxxxx
> AIM and skype address: joyctilton
> check out my journal at http://joyctilton.livejournal.com
>
>
> --
> To post a message to the list, send it to jfw@xxxxxxxxxxxxx
> To unsubscribe from this mailing list, send a message to
> jfw-request@xxxxxxxxxxxxx with the word unsubscribe in the subject line.
> Archives located at: //www.freelists.org/archives/jfw
>
> If you have any concerns about the list, post received from the list, or
> the way the list is being run, do not post them to the list. Rather
> contact the list owner at jfw-admins@xxxxxxxxxxxxxx
>
--
To post a message to the list, send it to jfw@xxxxxxxxxxxxx
To unsubscribe from this mailing list, send a message to
jfw-request@xxxxxxxxxxxxx with the word unsubscribe in the subject line.
Archives located at: //www.freelists.org/archives/jfw
If you have any concerns about the list, post received from the list, or the
way the list is being run, do not post them to the list. Rather contact the
list owner at jfw-admins@xxxxxxxxxxxxxx
--
To post a message to the list, send it to jfw@xxxxxxxxxxxxx
To unsubscribe from this mailing list, send a message to
jfw-request@xxxxxxxxxxxxx with the word unsubscribe in the subject line.
Archives located at: //www.freelists.org/archives/jfw
If you have any concerns about the list, post received from the list, or the
way the list is being run, do not post them to the list. Rather contact the
list owner at jfw-admins@xxxxxxxxxxxxxx
Other related posts:
