RE: Repair on jaws 8 How?
- From: "Robert S. Batchelor" <leehigh73@xxxxxxxxxxx>
- To: <jfw@xxxxxxxxxxxxx>
- Date: Fri, 2 Feb 2007 04:06:12 -0500
It was just a suggestion to make sure the playing field was equal in hopes
it would give a good even start to trouble-shooting this issue better
---------------------------------------------------------------------
Eliminate annoying spam!
My mailbox is protected by iHateSpam, the #1-rated spam buster.
http://www.ihatespam.net
-----Original Message-----
From: jfw-bounce@xxxxxxxxxxxxx [mailto:jfw-bounce@xxxxxxxxxxxxx] On Behalf
Of Joseph Lee
Sent: Friday, February 02, 2007 4:05 AM
To: jfw@xxxxxxxxxxxxx
Subject: RE: Repair on jaws 8 How?
Robert,
Word repair is even more risky--it requires
original installation media or the location
where you've had the installation source.
Cheers,
Joseph PddS. Did you try using Word with
JAWS versions other than 8.0?
> ----- Original Message -----
>From: "Robert S. Batchelor"
<leehigh73@xxxxxxxxxxx
>To: <jfw@xxxxxxxxxxxxx
>Date sent: Fri, 2 Feb 2007 03:55:40 -0500
>Subject: RE: Repair on jaws 8 How?
>Repairing JAWS might not be a bad suggestion,
after doing that and it didn't
>help did you try doing a Word repair too?
>---------------------------------------------
------------------------
>Eliminate annoying spam!
>My mailbox is protected by iHateSpam, the
#1-rated spam buster.
>http://www.ihatespam.net
>-----Original Message-----
>From: jfw-bounce@xxxxxxxxxxxxx
[mailto:jfw-bounce@xxxxxxxxxxxxx] On Behalf
>Of Chris Skarstad
>Sent: Friday, February 02, 2007 1:42 AM
>To: jfw@xxxxxxxxxxxxx
>Subject: Re: Repair on jaws 8 How?
>hi. Ok, now we might be getting somewhere.
from your message you say
>this only happens with word in JAWS 8. so
clearly, JAWS 8 and word
>aren't getting along. That's beyond my
scope, because I don't
>usually use word to write things down. You
might try biting the
>bullet and getting ahold of FS tech support
and just explain to them
>exactly what you told us, how JAWS 8 and word
don't seem to get
>along, yet when you use JAWS 7.1 and word
together it works fine. If
>those guys are worth the money they're paid,
they *should* be able to help
>you.
>Now as for these sticky keys, have you done
anything with them?
>because sticky keys probably aren't the issue
here, it's just JAWS
>being stupid and not acting like it should.
>I've been using JAWS since 1998 back when
version 3.0 was out and
>I've never once used sticky keys in my daily
life, and if I have
>nobody told me!
>Clearly this is a JAWS 8 only thing. If you
repaired JAWS and it
>still doesn't read word documents properly,
repairing from the CD
>isn't gonna do any good, because you'd just
be running the exact same
>program and doing the exact same type of
thing. All the CD is is a
>convenience type of thing. it just lets you
stick a CD in your drive
>and do it that way, rather than using the
version that's on the
>website. lots of people seem to think that
the version that's on the
>cd and the one on he website are different,
and 99.9% of the time
>that's nnot really the case. the only thing
that's different about
>the CD version of JAWS you might get when a
new version comes out is
>it has training materials on it, and those
can also be downloaded
>from the website as well, so again, you
aren't really gaining
>anything from re-installing it from the CD.
it's just doing the exact
>same thing you did earlier.
>That's about all i have for ya, maybe someone
else can help?
>At 08:28 PM 2/1/2007, you wrote:
>>Thank you so much for taking the time to
direct me in this repair
>>thing. And its true that we should learn all
this stuff up front but
>>how much can a person jam in his brain?
>>I followed each step, redd the entire repair
thing, shut down booted
>>up and reloaded a .doc file in Word and
Insert down arrow key will
>>still not read.
>>Even changed my key board in case it was bad.
>>So went into Insert F2 managers, to keyboard
and to the say all key
>>settings. I reset them as Insert down arrow
and it still won't work.
>><?xml:namespace prefix = o ns =
"urn:schemas-microsoft-com:office:office"
>/
>>So to check all this out I shut off 8 and
started up 7.1 and it
>>works perfect!!!
>>So what does all this mean for me? Well now,
spent a half hour on
>>phone with FS techs yesterday and the one guy
took me on a wild
>>goose chase and finally said he cold not help
me even do a repair
>>because I did not know where the file was.
You gave me perfect
>>directions and it was easy to follow them and
I thank you. But
>>still can't get 8 to do what I want it to.
>>So for now, I'll wait until disks arrive,
remove 8 and start over.
>>But there might be a setting either in sticky
keys or ? but this is
>>really getting me upset. I do a lot of
research and reading and I
>>only upgraded for the SAPI vvoices, not this
hassle.
>>It looks like that this little problem ain't
gonna go away
>>easy, and life won't be the same here until
that say all key begins
>>doing its thing for me!
>>So I'll just make this a challenge for
everyone out there and
>>hopefully we'll figure it out.
>> By the way, when doing a repair, it asks
you if you want to load
>> in any other synthesizer , should I add in
the sappy or is it already
>loaded?
>>So take care all and hope someone can come up
with a reasonable
>>reason why say all will not work?
>>Oh yeah, once I shut down, there came up a
really strange voice
>>which spoke up while pc was shutting down and
reloaded. It might
>>have said something like speak now or now
speak, what the heck was
>>that? Is that something new in jaws 8?
>> MMM
>>MMM
>>On Thu, 01 Feb 2007 12:59:21 -0600 Chris
Skarstad
>><<mailto:toonhead@xxxxxxxxxx>toonhead@runbox.
com> writes:
>>> hi. The only person who would know that is
your technition. This is
>>> why I think it's so incredibly important to
at least learn this
>>> stuff
>>> from the beginning, because when you're in a
situation like this,
>>> you're kind of relying on others for help
and that's not cool. ok,
>>> if you wanna try and find the file yourself,
do the following.
>>> 1. Go to the start menu.
>>> 2. Go to the search sub menu. You may have
to press your up or down
>>> arrow keys to get to it but it's there.
>>> 3. Press enter once and you'll land on the
choice that says, for
>>> files or folders...
>>> 4. now press your tab key until you hear,
all files and folders
>>> button.
>>> 5. Press your space bar and you'll get an
edit box to search your
>>> drives.
>>> The file name you're looking for is:
>>> J8.0.423U_ILM.exe
>>> I put that on a separate line so you would
be able to read it
>>> carefully.
>>> Just use your left and right arrow keys and
you'll be able to figure
>>> out exactly how it's spelled.
>>> 6. type the file name, *exactly* as it
appears into the edit box
>>> that says, all or part of the file name,
edit.
>>> 7. Now press your tab key 7 times and
you'll land on the search
>>> button. Press your space bar, and the
search will start. to find
>>> your results, press your tab key and you'll
find a list view. it'll
>>> probably say 0 items, but that's only
because it hasn't found
>>> anything yet. But with luck it will.
>>> 8. Ok, now if you were successful, you
found where your JAWS
>>> instalation file is, and now it's time to
repair JAWS.
>>> 9. Press enter when you're focused on the
file. You'll probably
>>> get a security warning, but you can bypass
that by pressing alt plus
>>> r.
>>> 10. Ok, now if things have gone right, the
instalation screen will
>>> have recognized that you have a version of
JAWS on your machine, and
>>> it's giving you the different options,
modify, repair, or
>>> remove. choose the repair option and JAWS
will do a repair on
>>> itself. If it asks you to reboot your
computer, please do so. Then
>>> when you come back up your version of JAWS
*should* be at the
>>> factory defaults.
>>> I hope this helps.
>>> At 12:22 PM 2/1/2007, you wrote:
>>>>Ok, someone got back and thanks, however, for
now jjust working
>>> with
>>>>the downloaded version... where do I find
the installation file you
>>>>downloaded from FS when I originally
installed 8?
>>>>Its on the c: but what is it called or is it
a specific file under
>>>>all the jaws files or waht and thanks again.
I'll start loking for
>>>>it. My disks should show up in a few days,
but in the mean time
>>> Jaws 8 is hell!
>>>>mmm
>>>>version 8
>>>>On Thu, 01 Feb 2007 11:04:10 -0400 Ryan
MacIsaac
>>>><<<mailto:jrmacisaac@xxxxxxxxxxx>mailto:jrmac
isaac@xxxxxxxxxxx><m
>>
ailto:jrmacisaac@xxxxxxxxxxx>jrmacisaac@eastl
ink.ca> writes:
>>>>Hi,
>>>>To do a repair of Jaws 8, simply put the Jaws
installation CD in
>>>>your CD drive or run the installation file
you downloaded from FS
>>>>when you originally installed version 8.
When you do this on a
>>>>system that already has Jaws 8 installed, you
will get options to
>>>>repair or modify the installation of Jaws.
Select the repair option
>>>>and hopefully this will fix your problem.
>>>>Regards,
>>>>Ryan
>>>>-----Original Message-----
>>>>From:
<mailto:jfw-bounce@xxxxxxxxxxxxx>jfw-bounce@f
reelists.org
>> [mailto:jfw-bounce@xxxxxxxxxxxxx] On
>>>>Behalf Of
<mailto:tickpub@xxxxxxxx>tickpub@xxxxxxxx
>>>>Sent: Thursday, February 01, 2007 2:12 AM
>>>>To:
<mailto:jfw@xxxxxxxxxxxxx>jfw@xxxxxxxxxxxxx
>>>>Subject: Re: Repair on jaws 8 How?
>>>>Back again about jaws repair: Went to jaws 8
menu, tools, and to
>>>>remove jaws. Then as you said another menu
came forth but it only
>>>>had two radio buttons there.
>>>> Remove jaws only
>>>>And
>>>>Remove jaws and shared components
>>>> Nothing else but Next and cancel
>>>>No sign of repair.
>>>>I was told that 8 has no repair menu unless
you find it somewhere
>>>>buried in the jaws files???
>>>>MMM
>>>>On Wed, 31 Jan 2007 23:49:25 -0600 Chris
Skarstad
>>>><<<mailto:toonhead@xxxxxxxxxx>mailto:toonhead
@runbox.com><mailto:
>> toonhead@xxxxxxxxxx>toonhead@xxxxxxxxxx>
writes:
>>>>> hi. The version that is on the CD is the
exact same version as
>>> the
>>>>> one you download off the website, , accept
it doesn't have the
>>> sapi
>>>>> 5
>>>>> voices. try this.
>>>>> 1. go to your start menu.
>>>>> 2. then go to programs.
>>>>> 3. Go to JAWS 8.0 sub menu, you may need to
press j several
>>> times
>>>>> to
>>>>> get there.
>>>>> 4. go to tools sub menu, and then
>>>>> to the uninstall JAWS option. Now we're not
going to uninstall
>>> JAWS,
>>>>> but this is where the repair option is.
>>>>> so press enter on uninstall JAWS and wait
for the screen to come
>>> up.
>>>>> you'll get a set of radio buttons, i believe
it is. your
>>> choices
>>>>> will
>>>>> be modify, repair, or remove. You'll want
to repair JAWS which
>>>>> basically sets it back to the factory
defaults as if it'd never
>>> been
>>>>> installed before.
>>>>> After this process is complete, you'll
probably be asked to
>>> reboot
>>>>> your computer, so do that. when you come
back up you'll have a
>>> fresh
>>>>> install of JAWS 8.0 as if it'd never been
installed before. One
>>>>> thing
>>>>> I should note, you haven't received your CDS
yet. So when you
>>>>> receive them, the only one you're going to
need to use is the
>>> one
>>>>> with the SAPI 5 voices on it. You do not
need to re-install
>>> JAWS
>>>>> from
>>>>> your CD at all. In fact you'd just be doing
what you're going to
>>> do
>>>>> and your version would be repaired or
modified again and you
>>> don't
>>>>> want to do that. so when your cds arrive,
don't reinstall JAWS
>>>>> again. Just install your SAPI 5 voices and
you'll be good.
>>>>> At 11:21 PM 1/31/2007, you wrote:
>>>>>>Hi and followed your instructions and nothing
about repair cold
>>> be
>>>>> found.
>>>>>>I tried several times and there is tools,
remove, rarely? auto
>>>>> updates
>>>>>>and a few other things that show but no
repair.
>>>>>>So far 8 for me is a real bummer. Maybe when
I get the disks
>>> it
>>>>> might do
>>>>>>better?
>>>>>>Thanks
>>>>>>MMM
>>>>>>On Wed, 31 Jan 2007 20:52:26 -0800 Joseph Lee
>>>><<<mailto:joseph.lee22590@xxxxxxxxxxxx>mailto
:joseph.lee22590@bli
>>
ndsea.com><mailto:joseph.lee22590@xxxxxxxxxxx
>joseph.lee22590@xxxxxxxxxxx
>>>> m> writes:
>>>>>>> Hi there,
>>>>>>> You'll need to go to Control Panel and
select
>>>>>>> Aed or Remove Programs. Select Freedom
>>>>>>> Scientific JAWS 8.0, then press TAB until
you
>>>>>>> hear change button. Press enter. It should
>>>>>>> then present a dialog and will ask you what
>>>>>>> to do. Press enter on Repair option. It
>>>>>>> should repair itself and it will present
>>>>>>> Finish dialog. Press enter on Finish
button.
>>>>>>> Cheers,
>>>>>>> Joseph
>>>>>>>> ----- Original Message -----
>>>>>>>>From:
><<mailto:tickpub@xxxxxxxx>mailto:tickpub@juno
com><mailto:tickpub@xxxxxxxx>t
>ickpub@xxxxxxxx
>>>>>>>>To:
><<mailto:jfw@xxxxxxxxxxxxx>mailto:jfw@freelis
ts.org><mailto:jfw@xxxxxxxxxxxx
>g>jfw@xxxxxxxxxxxxx
>>>>>>>>Date sent: Wed, 31 Jan 2007 20:12:34 -0800
>>>>>>>>Subject: Repair on jaws 8 How?
>>>>>>>>Yes, need to do a repair on my new 8, how do
>>>>>>> I do this for the repair is
>>>>>>>>no longer under the menues in programs?
>>>>>>>>MMM
>>>>>>>>--
>>>>>>>>JFW related links:
>>>>>>>>JFW homepage:
><<http://www.freedomscientific.com/>http://ww
w.freedomscientific.com/>http:/
>/www.freedomscientific.com/
>>>>>>>>Scripting mailing list:
><<http://lists.the-jdh.com/listinfo.cgi/scrip
to>http://lists.the-jdh.com/lis
>tinfo.cgi/scripto>http://lists.the-jdh.com/li
stinfo.cgi/scripto
>>>>>>> graphy-the-jdh.com
>>>>>>>>JFW List instructions:
>>>>>>>>To post a message to the list, send it to
><<mailto:jfw@xxxxxxxxxxxxx>mailto:jfw@freelis
ts.org><mailto:jfw@xxxxxxxxxxxx
>g>jfw@xxxxxxxxxxxxx
>>>>>>>>To unsubscribe from this mailing list, send a
>>>>>>> message to
><<mailto:jfw-request@xxxxxxxxxxxxx>mailto:jfw
-request@xxxxxxxxxxxxx><mailto:
>jfw-request@xxxxxxxxxxxxx>jfw-request@freelis
ts.org
>> with
>>> the
>>>>>>> word unsubscribe in the subject line.
>>>>>>>>Archives located at:
><<//www.freelists.org/archives/jfw>http:
//www.freelists.org/archives/jf
>w>//www.freelists.org/archives/jfw
>>>>>>>>If you have any concerns about the list, post
>>>>>>> received from the list, or the way the list
>>>>>>> is being run, do not post them to the list.
>>>>>>> Rather contact the list owner at
><<mailto:jfw-admins@xxxxxxxxxxxxx>mailto:jfw-
admins@xxxxxxxxxxxxx><mailto:jf
>w-admins@xxxxxxxxxxxxx>jfw-admins@xxxxxxxxxxx
rg.
>>>>>>> --
>>>>>>> JFW related links:
>>>>>>> JFW homepage:
><<http://www.freedomscientific.com/>http://ww
w.freedomscientific.com/>http:/
>/www.freedomscientific.com/
>>>>>>> Scripting mailing list:
><<http://lists.the-jdh.com/listinfo.cgi/scrip
tography-the-jdh.com>http://lis
>ts.the-jdh.com/listinfo.cgi/scriptography-the
-jdh.com>http://lists.the-jdh.c
>om/listinfo.cgi/scriptography-the-jdh.com
>>>>>>> JFW List instructions:
>>>>>>> To post a message to the list, send it to
><<mailto:jfw@xxxxxxxxxxxxx>mailto:jfw@freelis
ts.org><mailto:jfw@xxxxxxxxxxxx
>g>jfw@xxxxxxxxxxxxx
>>>>>>> To unsubscribe from this mailing list, send
a message to
><<mailto:jfw-request@xxxxxxxxxxxxx>mailto:jfw
-request@xxxxxxxxxxxxx><mailto:
>jfw-request@xxxxxxxxxxxxx>jfw-request@freelis
ts.org
>>>> with the word unsubscribe in the
>>>>> subject
>>>>>>> line.
>>>>>>> Archives located at:
><<//www.freelists.org/archives/jfw>http:
//www.freelists.org/archives/jf
>w>//www.freelists.org/archives/jfw
>>>>>>> If you have any concerns about the list,
post received from
>>> the
>>>>> list,
>>>>>>> or the way the list is being run, do not
post them to the
>>> list.
>>>>>>> Rather contact the list owner at
><<mailto:jfw-admins@xxxxxxxxxxxxx>mailto:jfw-
admins@xxxxxxxxxxxxx><mailto:jf
>w-admins@xxxxxxxxxxxxx>jfw-admins@xxxxxxxxxxx
rg.
>>>>>>Michael Thanks You...
>>>>>>TickTalk Publishing Invites You...
>>>>>>And
>>
<<http://www.ticktalk.net/>http://www.ticktal
k.net/>www.ticktalk.net
>> Welcomes You...
>>>>>>Read Our Stories And Have A Better Life!
>>>>>>--
>>>>>>JFW related links:
>>>>>>JFW homepage:
><<http://www.freedomscientific.com/>http://ww
w.freedomscientific.com/>http:/
>/www.freedomscientific.com/
>>>>>>Scripting mailing list:
>>>><<http://lists.the-jdh.com/listinfo.cgi/scrip
tography-the-jdh.com
>>>http://lists.the-jdh.com/listinfo.cgi/scripto
graphy-the-jdh.com
>>>>
http://lists.the-jdh.com/listinfo.cgi/scripto
graphy-the-jdh.com
>>>>>>JFW List instructions:
>>>>>>To post a message to the list, send it to
><<mailto:jfw@xxxxxxxxxxxxx>mailto:jfw@freelis
ts.org><mailto:jfw@xxxxxxxxxxxx
>g>jfw@xxxxxxxxxxxxx
>>>>>>To unsubscribe from this mailing list, send a
message to
>>>>>><<mailto:jfw-request@xxxxxxxxxxxxx>mailto:jfw
-request@freelis
>>
ts.org><mailto:jfw-request@xxxxxxxxxxxxx>jfw-
request@xxxxxxxxxxxxx
>>> with
>>>> the word unsubscribe in the subject
>>>>> line.
>>>>>>Archives located at:
><<//www.freelists.org/archives/jfw>http:
//www.freelists.org/archives/jf
>w>//www.freelists.org/archives/jfw
>>>>>>If you have any concerns about the list, post
received from
>>> the
>>>>>>list, or the way the list is being run, do
not post them to
>>> the
>>>>>>list. Rather contact the list owner at
><<mailto:jfw-admins@xxxxxxxxxxxxx>mailto:jfw-
admins@xxxxxxxxxxxxx><mailto:jf
>w-admins@xxxxxxxxxxxxx>jfw-admins@xxxxxxxxxxx
rg.
>>>>>>__________ NOD32 2025 (20070201) Information
__________
>>>>>>This message was checked by NOD32 antivirus
system.
>>>>>><<http://www.eset.com>http://www.eset.com>htt
p://www.eset.com
>>>>> --
>>>>> JFW related links:
>>>>> JFW homepage:
><<http://www.freedomscientific.com/>http://ww
w.freedomscientific.com/>http:/
>/www.freedomscientific.com/
>>>>> Scripting mailing list:
><<http://lists.the-jdh.com/listinfo.cgi/scrip
tography-the-jdh.com>http://lis
>ts.the-jdh.com/listinfo.cgi/scriptography-the
-jdh.com>http://lists.the-jdh.c
>om/listinfo.cgi/scriptography-the-jdh.com
>>>>> JFW List instructions:
>>>>> To post a message to the list, send it to
><<mailto:jfw@xxxxxxxxxxxxx>mailto:jfw@freelis
ts.org><mailto:jfw@xxxxxxxxxxxx
>g>jfw@xxxxxxxxxxxxx
>>>>> To unsubscribe from this mailing list, send
a message to
><<mailto:jfw-request@xxxxxxxxxxxxx>mailto:jfw
-request@xxxxxxxxxxxxx><mailto:
>jfw-request@xxxxxxxxxxxxx>jfw-request@freelis
ts.org
>> with
>>>> the word unsubscribe in the subject
>>>>> line.
>>>>> Archives located at:
><<//www.freelists.org/archives/jfw>http:
//www.freelists.org/archives/jf
>w>//www.freelists.org/archives/jfw
>>>>> If you have any concerns about the list,
post received from the
>>>>> list, or the way the list is being run, do
not post them to the
>>>>> list. Rather contact the list owner at
><<mailto:jfw-admins@xxxxxxxxxxxxx>mailto:jfw-
admins@xxxxxxxxxxxxx><mailto:jf
>w-admins@xxxxxxxxxxxxx>jfw-admins@xxxxxxxxxxx
rg.
>>>>Michael Thanks You...
>>>>TickTalk Publishing Invites You...
>>>>And
>>
<<http://www.ticktalk.net/>http://www.ticktal
k.net/>www.ticktalk.net
>> Welcomes You...
>>>>Read Our Stories And Have A Better Life!
>>>>Michael Thanks You...
>>>>TickTalk Publishing Invites You...
>>>>And
<http://www.ticktalk.net/>www.ticktalk.net
Welcomes You...
>>>>Read Our Stories And Have A Better Life!
>>>>__________ NOD32 2027 (20070201) Information
__________
>>>>This message was checked by NOD32 antivirus
system.
>>>><<http://www.eset.com>http://www.eset.com>htt
p://www.eset.com
>>> --
>>> JFW related links:
>>> JFW homepage:
>>
<http://www.freedomscientific.com/>http://www
freedomscientific.com/
>>> Scripting mailing list:
><http://lists.the-jdh.com/listinfo.cgi/script
ography-the-jdh.com>http://list
>s.the-jdh.com/listinfo.cgi/scriptography-the-
jdh.com
>>> JFW List instructions:
>>> To post a message to the list, send it to
>> <mailto:jfw@xxxxxxxxxxxxx>jfw@xxxxxxxxxxxxx
>>> To unsubscribe from this mailing list, send
a message to
>>>
<mailto:jfw-request@xxxxxxxxxxxxx>jfw-request
@freelists.org with
>> the word unsubscribe in the subject
>>> line.
>>> Archives located at:
><//www.freelists.org/archives/jfw>http:/
/www.freelists.org/archives/jfw
>>> If you have any concerns about the list,
post received from the
>>> list, or the way the list is being run, do
not post them to the
>>> list. Rather contact the list owner at
>>
<mailto:jfw-admins@xxxxxxxxxxxxx>jfw-admins@f
reelists.org.
>>Michael Thanks You...
>>TickTalk Publishing Invites You...
>>And
<http://www.ticktalk.net/>www.ticktalk.net
Welcomes You...
>>Read Our Stories And Have A Better Life!
>>__________ NOD32 2029 (20070202) Information
__________
>>This message was checked by NOD32 antivirus
system.
>><http://www.eset.com>http://www.eset.com
>--
>JFW related links:
>JFW homepage:
http://www.freedomscientific.com/
>Scripting mailing list:
>http://lists.the-jdh.com/listinfo.cgi/scripto
graphy-the-jdh.com
>JFW List instructions:
>To post a message to the list, send it to
jfw@xxxxxxxxxxxxx
>To unsubscribe from this mailing list, send a
message to
>jfw-request@xxxxxxxxxxxxx with the word
unsubscribe in the subject line.
>Archives located at:
//www.freelists.org/archives/jfw
>If you have any concerns about the list, post
received from the list, or the
>way the list is being run, do not post them
to the list. Rather contact the
>list owner at jfw-admins@xxxxxxxxxxxxxx
>--
>JFW related links:
>JFW homepage:
http://www.freedomscientific.com/
>Scripting mailing list:
http://lists.the-jdh.com/listinfo.cgi/scripto
graphy-the-jdh.com
>JFW List instructions:
>To post a message to the list, send it to
jfw@xxxxxxxxxxxxx
>To unsubscribe from this mailing list, send a
message to jfw-request@xxxxxxxxxxxxx with the
word unsubscribe in the subject line.
>Archives located at:
//www.freelists.org/archives/jfw
>If you have any concerns about the list, post
received from the list, or the way the list
is being run, do not post them to the list.
Rather contact the list owner at
jfw-admins@xxxxxxxxxxxxxx
--
JFW related links:
JFW homepage: http://www.freedomscientific.com/
Scripting mailing list:
http://lists.the-jdh.com/listinfo.cgi/scriptography-the-jdh.com
JFW List instructions:
To post a message to the list, send it to jfw@xxxxxxxxxxxxx
To unsubscribe from this mailing list, send a message to
jfw-request@xxxxxxxxxxxxx with the word unsubscribe in the subject line.
Archives located at: //www.freelists.org/archives/jfw
If you have any concerns about the list, post received from the list, or the
way the list is being run, do not post them to the list. Rather contact the
list owner at jfw-admins@xxxxxxxxxxxxxx
--
JFW related links:
JFW homepage: http://www.freedomscientific.com/
Scripting mailing list:
http://lists.the-jdh.com/listinfo.cgi/scriptography-the-jdh.com
JFW List instructions:
To post a message to the list, send it to jfw@xxxxxxxxxxxxx
To unsubscribe from this mailing list, send a message to
jfw-request@xxxxxxxxxxxxx with the word unsubscribe in the subject line.
Archives located at: //www.freelists.org/archives/jfw
If you have any concerns about the list, post received from the list, or the
way the list is being run, do not post them to the list. Rather contact the
list owner at jfw-admins@xxxxxxxxxxxxxx
Other related posts:
