Crystal. All I can suggest is that you might want to check the see if your recorder is supported by cd creator 6 at the roxio website: http://kb.roxio.com/content/kb/EE6000055 or more direcly http://rpp.roxio.com/drives/?page=supported_drives I know that you said it works, and if you have applied the easy cd creator 6 engine update and creator classic update, I would think it should be recognized. I have separate updates for 6, one for the engine and one for creator classic. I don't know which might actually add support for more recorders. If you need either update, let me know. Debbie ----- Original Message ----- From: "Crystal French" <raincrow@xxxxxxxxxxxxx> To: <jfw@xxxxxxxxxxxxx> Sent: Tuesday, May 23, 2006 12:46 PM Subject: Re: Easy CD Creator 6 question Hi Debbie, I followed your instructions, and it all worked as you said, except that when I tried the left click, nothing happens. I also tried a right click, and even shft+F10, but nothing comes up. It really is peculiar. Thanks for the tips, and a good thing to remember. It just seems like something is blocking the drive from being recognized. Crystal -- To post a message to the list, send it to jfw@xxxxxxxxxxxxx To unsubscribe from this mailing list, send a message to jfw-request@xxxxxxxxxxxxx with the word unsubscribe in the subject line. Archives located at: //www.freelists.org/archives/jfw If you have any concerns about the list, post received from the list, or the way the list is being run, do not post them to the list. Rather contact the list owner at jfw-admins@xxxxxxxxxxxxxx -- To post a message to the list, send it to jfw@xxxxxxxxxxxxx To unsubscribe from this mailing list, send a message to jfw-request@xxxxxxxxxxxxx with the word unsubscribe in the subject line. Archives located at: //www.freelists.org/archives/jfw If you have any concerns about the list, post received from the list, or the way the list is being run, do not post them to the list. Rather contact the list owner at jfw-admins@xxxxxxxxxxxxxx