In message <4ef7eef9a0riscos@xxxxxxxxxxxxx> on 24 Jun 2007 Richard Ashbery <riscos@xxxxxxxxxxxxx> wrote: > In article <467E44B2.7050107@xxxxxxxxxx>, John Ballance > <jwb@xxxxxxxxxx> wrote: >> please confirm which version of ro5 you are using.. > ************** > Version 5.13 > ************** >> Richard Ashbery wrote: >>> If you shutdown the machine by CTRL-Shift-F12 it offers one >>> button - "Restart". Stupidly I have inadvertently pressed the F12 >>> key again by mistake instead of the 'Return' key. The machine >>> responds by displaying the normal single white command bar with >>> its CLI prompt at the bottom of the screen and then powers down. >>> >>> When the machine is re-powered I get an error: Disc error 23 at >>> :4 C00 which presumably means the disc can't be found. >>> >>> Recovery is possible by leaving the machine off for about 10 >>> minutes and then re-powering. Have other users discovered this? >>> Is there a patch to stop this happening or do I have to pay more >>> attention to what my fingers are doing? The problem does not occur here in those circumstances with R0 5.11. Does it occur consistently? I very occasionally get a similar message on start up so I suspect an intermittent hardware glitch rather than the OS Regards -- Andrew Pinder --- To alter your preferences or leave the group, visit //www.freelists.org/list/iyonix-support Other info via //www.freelists.org/webpage/iyonix-support