In message <45CC41A6.8010303@xxxxxxxxxx> John <jwb@xxxxxxxxxx> wrote: > Hi Rik > > Rik Griffin wrote: > > > > Latest test results: After about 16 hours of sending multicast UDP > > packets at approx 2.5Mbits/sec the interrupt problem had occurred. > > Can't be more specific about the time as I left it running overnight. > > > > Reenabling the IRQ using the HAL call revealed the previous state of > > the IRQ to have been off (HAL entry point #1 returned 0 in r0). > > > > not a surprise to to see this in 512 too. did the machine resume OK > after this, or was a reset still required. It ran happily for a couple of hours after this. > Also, was there any (potential) usb activity on this irq, or were all > usb devices connected to the other channel? In this instance I had moved the USB card, the 3 USB devices listed by *PCIDevices were on IRQs 60, 61 and 62, the ethernet device was on IRQ 59. So, no USB activity on that IRQ. -- Rik Griffin Software Engineer, Denbridge Marine Ltd --- To alter your preferences or leave the group, visit //www.freelists.org/list/iyonix-support Other info via //www.freelists.org/webpage/iyonix-support