And saved.... -----Original Message----- From: isapros-bounce@xxxxxxxxxxxxx [mailto:isapros-bounce@xxxxxxxxxxxxx] On Behalf Of Jim Harrison Sent: Thursday, June 15, 2006 4:30 PM To: isapros@xxxxxxxxxxxxx Subject: [isapros] Re: Un-Pro Question ..it does, but only if it's been configured prior to the failure. ------------------------------------------------------- Jim Harrison MCP(NT4, W2K), A+, Network+, PCG http://isaserver.org/Jim_Harrison/ http://isatools.org Read the help / books / articles! ------------------------------------------------------- -----Original Message----- From: isapros-bounce@xxxxxxxxxxxxx [mailto:isapros-bounce@xxxxxxxxxxxxx] On Behalf Of Amy Babinchak Sent: Thursday, June 15, 2006 15:15 To: isapros@xxxxxxxxxxxxx Subject: [isapros] Re: Un-Pro Question So System policy doesn't come into play for RDP? And all I need on the NICs is TCP/IP. Just trying to cover all the bases because I make a ton of changes to the configuration yesterday but most of them were at least 30 minutes before Comcast cut me off. -----Original Message----- From: isapros-bounce@xxxxxxxxxxxxx [mailto:isapros-bounce@xxxxxxxxxxxxx] On Behalf Of Thor (Hammer of God) Sent: Thursday, June 15, 2006 3:06 PM To: isapros@xxxxxxxxxxxxx Subject: [isapros] Re: Un-Pro Question All you need for Terminal Services is 3389 in, unless they've changed the port. The rule is "RDP (Terminal Services) Server" not just "RDP (Terminal Services)." First thing I would have them check is that all the services are running- if it is in lockdown mode, only the System Policy would be active. By default, the only RDP node included in the System Policy is if you installed via Terminals Services in the first place- then that box would be in Remote Management Computers." Other than that, just make sure RDP is allowed from External to Local Host. t On 6/15/06 11:52 AM, "Amy Babinchak" <amy@xxxxxxxxxxxxxxxxxxxxxxxxxx> spoketh to all: > > I think I've done something to lock myself out of an ISA server. :( > Funny thing is that I wasn't making any firewall changes at the time. > Comcast decided to do maintenance in the middle of my configuration > efforts. Now I can't connect back in. > > I can't get in using PcAnywhere or Terminal Services. (No I didn't > install PCAnywhere it was already there.) > > I don't see a doc anyplace on what all needs to be allowed for terminal > services to work. NIC configuration, System Policies, Firewall Policies, > Services running. I need to walk the guy on the other end through > checking all of this for me. Anyone know of a doc? Alternatively I can > fly down to San Antonio but I'd rather not. > > Thanks, > > Amy > > > > All mail to and from this domain is GFI-scanned.