With PF disable still cant connect. From the ISA i can connect to the ftp server ON SPR i use for the internal ip the ftp server ip on the external ip the ip (ISA´s network card) that connects the ISA to the ADSL router. On the ftp client: STATUS:> Resolving host name ginocar.dns2go.com... STATUS:> Host name ginocar.dns2go.com resolved: ip = 213.13.76.137. STATUS:> Connecting to ftp server ginocar.dns2go.com:21 (ip = 213.13.76.137)... STATUS:> Socket connected. Waiting for welcome message... ERROR:> Control connection closed. ----- Original Message ----- From: "Jim Harrison" <jim@xxxxxxxxxxxx> To: "[ISAserver.org Discussion List]" <isalist@xxxxxxxxxxxxx> Sent: Wednesday, August 28, 2002 2:20 PM Subject: [isalist] Re: [isalist] Re: Socket error = #10060". (FTP) > http://www.ISAserver.org > > > Allowing traffic from the Internet to the LAT requires Server Publishing Rules, not Packet Filters. > In fact, using both creates a conflict for ISA. > Drop the PF and use only the SPR... > > Jim Harrison > MCP(NT4, W2K), A+, Network+, PCG > http://isaserver.org/pages/author_index.asp?aut=3 > http://jalojash.org/isatools > Read the books! > > ----- Original Message ----- > From: "MuaDib" <Ginocar7@xxxxxxxxxxx> > To: "[ISAserver.org Discussion List]" <isalist@xxxxxxxxxxxxx> > Sent: Wednesday, August 28, 2002 1:23 AM > Subject: [isalist] Re: Socket error = #10060". (FTP) > > > http://www.ISAserver.org > > > I can connect From the ISA to the ftp server. > > I´m also using ADSL Efficien Networks 5861 Router on ISA. > I created a inbound NAT setting using TCP port 21 to same port on ISA IP. > > i did create a packet filter for tcp port 21 inbound and outbound > Do i have to open any other port? > > > ------------------------------------------------------ > You are currently subscribed to this ISAserver.org Discussion List as: jim@xxxxxxxxxxxx > To unsubscribe send a blank email to $subst('Email.Unsub') > > > > ------------------------------------------------------ > You are currently subscribed to this ISAserver.org Discussion List as: Ginocar7@xxxxxxxxxxx > To unsubscribe send a blank email to $subst('Email.Unsub') >