RE: VPN Disconnect crashes ISA
- From: David Dellanno <david@xxxxxxxxxx>
- To: "'[ISAserver.org Discussion List]'" <isalist@xxxxxxxxxxxxx>
- Date: Tue, 4 Sep 2001 07:02:58 -0400
Hi Patrick,
Windows 2000 Service Pack 2 suppose to have fixed the QoS issue that
conflicts with VPN. Disabling the QoS on the external nic will not affect
reports but you will not be able to utilize QoS bandwidth rules on you
external nic.
-----Original Message-----
From: patricks@xxxxxxxxxxxxxxxxxx [mailto:patricks@xxxxxxxxxxxxxxxxxx]
Sent: Tuesday, September 04, 2001 6:54 AM
To: [ISAserver.org Discussion List]
Subject: [isalist] RE: VPN Disconnect crashes ISA
http://www.ISAserver.org
Thanks, I will give this a go after office hours. I thought that the QOS was
needed by ISA server. Will this affect reports if I disable this ?
Patrick
-----Original Message-----
From: Hugh.Roberts@xxxxxxxxxxxx [mailto:Hugh.Roberts@xxxxxxxxxxxx]
Sent: 04 September 2001 10:26
To: [ISAserver.org Discussion List]
Subject: [isalist] RE: VPN Disconnect crashes ISA
http://www.ISAserver.org
Yup I had this....
Last months ISA news letter "tip of the week" or something similar mentioned
disable QOS on your nic and it worked for me.
-----Original Message-----
From: patricks@xxxxxxxxxxxxxxxxxx [ mailto:patricks@xxxxxxxxxxxxxxxxxx
<mailto:patricks@xxxxxxxxxxxxxxxxxx> ]
Sent: 04 September 2001 11:11
To: [ISAserver.org Discussion List]
Subject: [isalist] VPN Disconnect crashes ISA
http://www.ISAserver.org <http://www.ISAserver.org>
Has anyone else seen this ? We recently changed the IP address range
which was being used by our ISA server. After a few issues all seemed
fine. Until I tried to VPN to our site. The RAS works fine as it did
before, except when I disconnect the VPN connection the ISA Server
Control service crashes. The following error is given :-
The Microsoft ISA Server Control service terminated with
service-specific error 278540.
If no one has seen this before, I guess a re-install is necessary.
Patrick
------------------------------------------------------
You are currently subscribed to this ISAserver.org Discussion List as:
hugh.roberts@xxxxxxxxxxxx
To unsubscribe send a blank email to $subst('Email.Unsub')
Engen Petroleum Limited disclaim all liability for any loss, damage or
expense however caused, arising from the sending, receipt, or use of this
e-mail communication and on any reliance placed upon the information
provided through this service and does not guarantee the completeness or
accuracy of the information.
------------------------------------------------------
You are currently subscribed to this ISAserver.org Discussion List as:
patricks@xxxxxxxxxxxxxxxxxx
To unsubscribe send a blank email to $subst('Email.Unsub')
------------------------------------------------------
You are currently subscribed to this ISAserver.org Discussion List as:
david@xxxxxxxxxx
To unsubscribe send a blank email to $subst('Email.Unsub')
Other related posts:
