Jerry’s email is doing it J
I'd look at the Terminal Services Manager to ensure that RDP is
listening on all interfaces next, but that's just me. Of course,
your recommendations are more comprehensive and provide next steps...
t
From: isalist-bounce@xxxxxxxxxxxxx [mailto:isalist-
bounce@xxxxxxxxxxxxx] On Behalf Of Mike Anderson
Sent: Wednesday, January 13, 2010 10:37 AM
To: isalist@xxxxxxxxxxxxx
Subject: [isalist] Re: Unable to RDP into the ISA Server, after
installing ISA 2006 (with sp1)
Yes sir – during installs, I always follow a strict set of guideline
s that I created for myself – that is one of the very first things I
check off, immediately after the server boot up for the very first
time. I’ve done SO many server installs, I can do it in my sleep
– I can honestly say, I’ve done around 90 installs (that is just
for 2003 Server)….
This problem is a REALLY weird one…
One thing I need to do, is have the active log run while I am VNC’d
in, so I can see the precise transcript of what’s going on when I at
tempt the connection.
Still, I’d be grateful if you could jog your memory and see if anybo
dy here has seen anything like this before. My co-worker is chompin
g at the bit to gain access to this server, so he can keep an eye on
things when I am unreachable. I don’t want to give him VNC access,
as I can’t lose my console screen – and I too, would rather use
RDP as a means of accessing the server.
Thanks again for all your help,
Mike
From: isalist-bounce@xxxxxxxxxxxxx [mailto:isalist-
bounce@xxxxxxxxxxxxx] On Behalf Of Thor (Hammer of God)
Sent: Wednesday, January 13, 2010 12:28 PM
To: isalist@xxxxxxxxxxxxx
Subject: [isalist] Re: Unable to RDP into the ISA Server, after
installing ISA 2006 (with sp1)
Not to state the obvious, but since this is a new install, you DID
go into computer properties, remote settings, and activate RDP, right?
Let’s start from there since the firewall itself is seeing the reque
st succeed.
t
From: isalist-bounce@xxxxxxxxxxxxx [mailto:isalist-
bounce@xxxxxxxxxxxxx] On Behalf Of Mike Anderson
Sent: Wednesday, January 13, 2010 7:11 AM
To: isalist@xxxxxxxxxxxxx
Subject: [isalist] Unable to RDP into the ISA Server, after
installing ISA 2006 (with sp1)
Hello All,
Very weird problem –
After installing ISA 2006, I am unable to RDP into the machine (and
yes, I am coming from a Remote Management authorized computer).
The weird part is, once I hit the connect button, it proceeds to
login, but then immediately aborts the process. If I look in the
event log on the ISA Server, it says that I had a successful login &
logout attempt.
It’s almost as if, the Client on MY side is the one aborting the con
nection – but I don’t get an error dialog popping up or anything
like that. Just a FYI, I have 40 other profiles setup on my system
that I use regularly with my RDP client, and there are no problems l
ogging into ANY other server.
Is there any place I should start looking first, in order to
diagnose this problem?
Thanks in advance for all your help,
Mike
avast!/SMTP2000 Antivirus: Inbound message clean.
Virus Database (VPS): 1/13/2010
Tested on: 1/13/2010 12:29:05 -0500
avast! - copyright (c) 1988-2010 ALWIL Software.
