RE: Rebuild problems

  • From: "Dan Bartley" <bartleyd@xxxxxxxxxxxxxxxxxxx>
  • To: "[ISAserver.org Discussion List]" <isalist@xxxxxxxxxxxxx>
  • Date: Fri, 9 Jan 2004 06:33:45 -0500

Cool tool. Thanks. I did not post the results because my problem was
bigger than config. Some broken items would start working then break
again. The firewall service has random crashes, internal communication
issues started popping up, etc. Clearly I have a bad install. I'm still
working my way through it, but I suspect a misapplied or mistimed
(meaning wrong order) patch. I will probably uninstall and start over, a
little less rushed.

 

Best Regards, 

Dan Bartley
Director, IT & Provisioning
NetCarrier Inc.
bartleyd@xxxxxxxxxxxxxxxxxxx
http://www.netcarrier.com <http://www.netcarrier.com/> 
Direct Phone: 215.966.3310 

  _____  

From: Steve Moffat [mailto:steve@xxxxxxxxxxxxxxxxxxxxxxxxxx] 
Sent: Monday, January 05, 2004 22:02
To: [ISAserver.org Discussion List]
Subject: [isalist] RE: Rebuild problems

 

http://www.ISAserver.org

Download and run Jim's isainfo utility from www.isatools.org and post
the results...:)

 

Steve

 

  _____  

From: Dan Bartley [mailto:bartleyd@xxxxxxxxxxxxxxxxxxx] 
Sent: Monday, January 05, 2004 10:13 PM
To: Isa Weblist
Subject: [isalist] Rebuild problems

http://www.ISAserver.org



I had a major hardware failure on the ISA server. I had to completely
replace it and rebuild from scratch. Absolutely nothing was changed on
internal servers.

I am having server publishing problems now and I can't seem to put my
finger on why. I ran the Exchange publishing wizards for SMTP and OWA.
Email is flowing in and out just fine. I can reach OWA with a test
laptop on the internal network not set with firewall client or proxy
settings. Most of the workstations can reach it fine. One workstation
can not.

There's more, possibly related. I also published 3 web sites. They are
all published identically, except for where they redirect to. I have a
specific internal IP for each web site. The test laptop can reach them
all fine. Most of the workstations can, except the one having an OWA
problem. Here's the sticky part. One of the web sites can be reached by
everything with no problem.

External sources can not reach OWA or 2 of the web sites. 1 of them
works fine from outside, the same one that works from the problem
workstation. Terminal services is having the same problem being
published as OWA and the 2 web sites. It all worked before the rebuild.

If I turn off proxy in Internet options on the problem workstation all
the web sites are reachable. 

Using ISA Enterprise in stand alone integrated mode. SP1, FP1 and all
post sp hotfixes, just as before.

I also had problems with allow-deny rules. It was ignoring deny rules
for accessing external sites. I had the allow all rule for Internet and
the created deny rules for specific users and groups based on schedules.
Everyone could still access everything at all times. I had to change the
allow rule to specified by users and groups and then the users
restricted by hours worked after I created scheduled allow rules.

I'm sure I've missed something painfully obvious, but it escapes me. Any
suggestions on where I should be looking? TIA

Best Regards, 

 

Dan Bartley

------------------------------------------------------
List Archives: http://www.webelists.com/cgi/lyris.pl?enter=isalist
ISA Server Newsletter: http://www.isaserver.org/pages/newsletter.asp
ISA Server FAQ: http://www.isaserver.org/pages/larticle.asp?type=FAQ
------------------------------------------------------
Other Internet Software Marketing Sites:
Leading Network Software Directory: http://www.serverfiles.com
No.1 Exchange Server Resource Site: http://www.msexchange.org
Windows Security Resource Site: http://www.windowsecurity.com/
Network Security Library: http://www.secinf.net/
Windows 2000/NT Fax Solutions: http://www.ntfaxfaq.com
------------------------------------------------------
You are currently subscribed to this ISAserver.org Discussion List as:
steve@xxxxxxxxxxxxxxxxxxxxxxxxxx
To unsubscribe send a blank email to $subst('Email.Unsub')
------------------------------------------------------
List Archives: http://www.webelists.com/cgi/lyris.pl?enter=isalist
ISA Server Newsletter: http://www.isaserver.org/pages/newsletter.asp
ISA Server FAQ: http://www.isaserver.org/pages/larticle.asp?type=FAQ
------------------------------------------------------
Other Internet Software Marketing Sites:
Leading Network Software Directory: http://www.serverfiles.com
No.1 Exchange Server Resource Site: http://www.msexchange.org
Windows Security Resource Site: http://www.windowsecurity.com/
Network Security Library: http://www.secinf.net/
Windows 2000/NT Fax Solutions: http://www.ntfaxfaq.com
------------------------------------------------------
You are currently subscribed to this ISAserver.org Discussion List as:
bartleyd@xxxxxxxxxxxxxxxxxxx
To unsubscribe send a blank email to $subst('Email.Unsub')


  _____  

This E-Mail is confidential. It is not intended to be read, copied,
disclosed or used by any person other than the recipient named above. 

Unauthorised use, disclosure, or copying is strictly prohibited and may
be unlawful. Optimum IT Solutions disclaims any liability for any action
taken in connection of this E-Mail. The comments or statements expressed
in this E-Mail are not necessarily those of Optimum IT Solutions or its
subsidiaries or affiliates.

administrator@xxxxxxxxxxxxxxxxxxxxxxxxxx
<mailto:administrator@xxxxxxxxxxxxxxxxxxxxxxxxxx>  
  _____  


Other related posts: