Hi Bill, I set this up for someone just a few days ago. You just need to forward TCP ports 47 and 1723 to the ISA firewall's external interface. Yes, I know its IP protocol 47, but the Linksys interface doesn't realize that :-) HTH, Tom -----Original Message----- From: William Holmes [mailto:wtholmes@xxxxxxxxxxxxxx] Sent: Tuesday, December 09, 2003 8:22 AM To: [ISAserver.org Discussion List] Subject: [isalist] PPTP Question http://www.ISAserver.org Hello, In order to use publishing it is necessary for the external IP address of the ISA server to stay at a fixed IP. Unfortunately I have a DHCP assigned address on my Cable Modem. My solution has been to install a Linksys BEFSX41 router. This router has a DMZ port. I have my ISA server configured as the DMZ host. In this way the ISA server always sees a fixed IP address despite what the external address is. In addition this router supports dynamic DNS updates so whenever the router's IP address changes it updates my Dynamic DNS service. All of my published services work find except PPTP. And this has only stopped working since updating to the latest Firmware v1.45.3. Outbound PPTP works fine but inbound PPTP to the ISA server does not. Does anyone have any experience with this or suggestions about how allow inbound PPTP to work. It was working fine in the v1.43.3 firmware but that firmware has issues with working with DDNS. Thanks Bill ------------------------------------------------------ List Archives: http://www.webelists.com/cgi/lyris.pl?enter=isalist ISA Server Newsletter: http://www.isaserver.org/pages/newsletter.asp ISA Server FAQ: http://www.isaserver.org/pages/larticle.asp?type=FAQ ------------------------------------------------------ Other Internet Software Marketing Sites: Leading Network Software Directory: http://www.serverfiles.com No.1 Exchange Server Resource Site: http://www.msexchange.org Windows Security Resource Site: http://www.windowsecurity.com/ Network Security Library: http://www.secinf.net/ Windows 2000/NT Fax Solutions: http://www.ntfaxfaq.com ------------------------------------------------------ You are currently subscribed to this ISAserver.org Discussion List as: tshinder@xxxxxxxxxxxxxxxxxx To unsubscribe send a blank email to $subst('Email.Unsub')