Hello Stefaan, Wednesday, March 13, 2002, 9:52:10 AM, you wrote: SP> http://www.ISAserver.org SP> John, <snip> SP> The problem is that ISA can only have *one* default gateway. In fact SP> this is a limitation of W2K, not ISA itself. </snip> Thus the definition of 'Default Gateway' If it doesn't know where to send it (ie different ip subnet, etc) then it sends it to the default gateway. Otherwise, it just sends it to the correct location automatically. SP> Regards, SP> Stefaan SP> -----Original Message----- SP> From: John Tolmachoff [mailto:jtolmachoff@xxxxxxxxxxxxxxxx] SP> Sent: dinsdag 12 maart 2002 23:42 SP> To: [ISAserver.org Discussion List] SP> Subject: [isalist] RE: Mystery loss on internal gateway on ISA HELP! SP> http://www.ISAserver.org SP> It is my understanding that you do not want to have any persistent SP> routes on the ISA server, or add any routes manually, only letting ISA SP> do the routing. SP> The reason being is that because if the firewall service should fail, SP> you will now be doing simple routing. SP> If the firewall failed, I would want all traffic to stop now. SP> John Tolmachoff SP> IT Manager, Network Engineer SP> 211 E. Imperial Hwy., Suite 106 SP> Fullerton, CA 92835 SP> 714-578-7999, ext. 104 SP> jtolmachoff@xxxxxxxxxxxxxxxx SP> www.reliancesoft.com SP> SP> -----Original Message----- SP> From: Nathan Simpson [mailto:nathansimpson@xxxxxxxxxxxxxxx] SP> Sent: Tuesday, March 12, 2002 2:32 PM SP> To: [ISAserver.org Discussion List] SP> Subject: [isalist] RE: Mystery loss on internal gateway on ISA HELP! SP> http://www.ISAserver.org SP> Don, >>From what I have learned on this list you don't add a gateway address SP> to the SP> internal interface via the network settings. SP> You have to add a persistent route using route add -p SP> HTH SP> Nathan Simpson SP> Australian Wool Handlers SP> Forest Rd SP> Lara VIC 3212 SP> -----Original Message----- SP> From: dmccall@xxxxxxxxxx [mailto:dmccall@xxxxxxxxxx] SP> Sent: Wednesday, 13 March 2002 09:12 SP> To: [ISAserver.org Discussion List] SP> Subject: [isalist] Mystery loss on internal gateway on ISA HELP! SP> http://www.ISAserver.org SP> Hi Everyone, SP> I have been monitoring this list for several months, and have picked up SP> some SP> useful tips, thank you! SP> However I have a problem with our ISA server that I have not been able SP> to SP> resolve. Due to security policy all Internet traffic has to come through SP> our SP> central office and all 30+ WAN sites use this link to the Internet. The SP> problem is that the ISA server losses the internal gateway. First it SP> showed SP> in the properties of the internal interface that it is there, however if SP> you SP> did an ipconfig it is not there (mystery number one). After adding some SP> persistent routes it does considerably better however it does still SP> happen SP> (mystery number two). The remedy is to simply open the properties of the SP> internal interface remove the internal gateway and close the properties, SP> then open the properties of the internal interface and add the gateway SP> and SP> it works again! (mystery number three) You do not have to reboot! Does SP> anyone know of a fix! I have not applied service pack 1a yet, I'm SP> waiting SP> for the smoke to clear first. Sure appreciate any help thank you. SP> Don McCall Email: dmccall@xxxxxxxxxx SP> Infrastructure Administrator - Information Systems SP> Baptist Community Services NSW & ACT SP> Website: <www.bcs.org.au> - Telephone: (02) 9941 6054 SP> Fax: (02) 9889 SP> 1520 SP> Address: Corporate Services - 157 Balaclava Road Marsfield NSW SP> 2122 SP> This message is intended for the addressee named and may SP> contain confidential information. If you are not the intended SP> recipient, please delete it and notify the sender. Views SP> expressed in this message are those of the individual sender, SP> and are not necessarily the views of Baptist Community Services. SP> ------------------------------------------------------ SP> You are currently subscribed to this ISAserver.org Discussion List as: SP> nathansimpson@xxxxxxxxxxxxxxx SP> To unsubscribe send a blank email to $subst('Email.Unsub') SP> ------------------------------------------------------ SP> You are currently subscribed to this ISAserver.org Discussion List as: SP> jtolmachoff@xxxxxxxxxxxxxxxx SP> To unsubscribe send a blank email to $subst('Email.Unsub') SP> ------------------------------------------------------ SP> You are currently subscribed to this ISAserver.org Discussion List as: SP> stefaan.pouseele@xxxxxxx SP> To unsubscribe send a blank email to $subst('Email.Unsub') SP> ------------------------------------------------------ SP> You are currently subscribed to this ISAserver.org Discussion List as: duthie.paul.j@xxxxxxxxxxxxxxxxxx SP> To unsubscribe send a blank email to $subst('Email.Unsub') -- Best regards, Paul Duthie duthie.paul.j@xxxxxxxxxxxxxxxxxx Network Manager, Ballarat High School www.ballaraths.vic.edu.au Sent Using The Bat! Version 1.54 Beta/45