# route delete default # route add default gw 192.168.1.1 1 I believe is the syntax. And that assumes that 192.168.1.1 is the inside of your ISA server. -----Original Message----- From: Alexandre Cavalcante Alencar [mailto:alexandre.alencar@xxxxxxxxxxxx] Sent: Monday, September 10, 2001 9:55 AM To: [ISAserver.org Discussion List] Subject: [isalist] Re: Help: How to get Linux through ISA server? http://www.ISAserver.org Set up your routed server on Linux to Ip Address of ISA Server Alexandre Cavalcante Alencar Technical Support / Coordinator Microsoft Official Curriculum - Windows 2000 alexandre.alencar@xxxxxxxxxxxx Phone: +55 (85) 296-9876 Mobile: +55 (85) 9995-3302 Aspec - Assessoria, Processamento e Contabilidade S/C Ltda Microsoft Certified Solution Provider Microsoft Certified Partner Phone: (85) 254-3223 Fax: +55 (85) 254-4779 Email: aspec@xxxxxxxxxxxx Internet: www.aspec.com.br -----Original Message----- From: Fernando Melo [mailto:frmelo1@xxxxxxxx] Sent: domingo, 9 de setembro de 2001 00:30 To: [ISAserver.org Discussion List] Subject: [isalist] Re: Help: How to get Linux through ISA server? http://www.ISAserver.org Anyone on icq or aim? I would love to get this problem resolved -----Original Message----- From: Mark Strangways [mailto:strangconst@xxxxxxxx] Sent: Saturday, September 08, 2001 8:06 PM To: [ISAserver.org Discussion List] Subject: [isalist] Re: Help: How to get Linux through ISA server? http://www.ISAserver.org Can you ping the gateway..? ----- Original Message ----- From: "Fernando Melo" <frmelo1@xxxxxxxx> To: "[ISAserver.org Discussion List]" <isalist@xxxxxxxxxxxxx> Sent: Saturday, September 08, 2001 10:43 PM Subject: [isalist] Re: Help: How to get Linux through ISA server? > http://www.ISAserver.org > > > I am having that securenat problem with ISA and Linux right now and have > no idea how to configure it correctly. I created a protocol rule based > on totally open access but I can't seem to get conqueror and netscape to > work right. I have put the default gateway in the netcfg console and > tried every possible configuration I can think of in the proxy section > of both netscape in conqueror. In netscape I get the authentication > screen and when I put in my credential it contacts my isa server but it > just stays there. In conqueror, it simply states that authentication > mode is invalid. Do you have any ideas? > > Thanks > Fernando > > -----Original Message----- > From: Jim Harrison [mailto:jim@xxxxxxxxxxxx] > Sent: Saturday, September 08, 2001 4:47 PM > To: [ISAserver.org Discussion List] > Subject: [isalist] Re: Help: How to get Linux through ISA server? > > http://www.ISAserver.org > > > If the client is secureNAT, then you'll have to have DNS services > available > to that machine for external as well as internal name resolution. > You also need SMTP protocol allowed. > > Jim Harrison > MCP(2K), A+, Network+, PCG > > ----- Original Message ----- > From: "Sothun Thay" <sothun@xxxxxxxxxxxxx> > To: "[ISAserver.org Discussion List]" <isalist@xxxxxxxxxxxxx> > Sent: Saturday, September 08, 2001 3:27 PM > Subject: [isalist] Help: How to get Linux through ISA server? > > > http://www.ISAserver.org > > > Dear all, > > I have ISA machine sit with a dialup connection to an ISP. All web proxy > request from cliets are routed to the Internet without problem. Linux is > a > single machine on the our network and having sendmail server installed. > Senmail have configured to use ISP's SMTP service to send all outbound > messages to the Internet users. Does anyone know what steps are involved > within ISA server to allow a SecureNAT as mentioned above to pass > through? > > Many thanks in advance, > > Sothun > PS. I have gone through the SecureNAT client topic but there is no > specific steps. > > ------------------------------------------------------ > You are currently subscribed to this ISAserver.org Discussion List as: > jim@xxxxxxxxxxxx > To unsubscribe send a blank email to $subst('Email.Unsub') > > > > ------------------------------------------------------ > You are currently subscribed to this ISAserver.org Discussion List as: > frmelo1@xxxxxxxx > To unsubscribe send a blank email to $subst('Email.Unsub') > > > ------------------------------------------------------ > You are currently subscribed to this ISAserver.org Discussion List as: strangconst@xxxxxxxx > To unsubscribe send a blank email to $subst('Email.Unsub') ------------------------------------------------------ You are currently subscribed to this ISAserver.org Discussion List as: frmelo1@xxxxxxxx To unsubscribe send a blank email to $subst('Email.Unsub') ------------------------------------------------------ You are currently subscribed to this ISAserver.org Discussion List as: alexandre.alencar@xxxxxxxxxxxx To unsubscribe send a blank email to $subst('Email.Unsub') ------------------------------------------------------ You are currently subscribed to this ISAserver.org Discussion List as: slebrun@xxxxxxxxxxx To unsubscribe send a blank email to $subst('Email.Unsub')