Re: Cannot ping the virtual IP on the NLB
- From: "Chhatwal, Raminder S." <RChhatwal@xxxxxxxxxxxxxxxxx>
- To: "'[ISAserver.org Discussion List]'" <isalist@xxxxxxxxxxxxx>
- Date: Mon, 10 Sep 2001 06:54:03 -0700
Jim,
Thanks for the response.
I have 2 NIC's in each member server.
NLB is set up in multicast mode.
No filters. Filter tab left to defaults.
Both the servers are connected to a switch.
I have gone through the W2K help for NLB.
I am going through the link. In the meantime, it will be great help if you
let me know what you think might be the problem.
Thanks
-----Original Message-----
From: Jim Harrison [mailto:jim@xxxxxxxxxxxx]
Sent: Monday, September 10, 2001 9:52 AM
To: [ISAserver.org Discussion List]
Subject: [isalist] Re: Cannot ping the virtual IP on the NLB
http://www.ISAserver.org
How many NICs on each member server?
Is NLB set up in unicast or multicast mode?
What are your filter settings in NLB?
Are you using a hub or switch to connect them together?
Have you read the W2K help regarding NLB? There are lots of hints and tips
on using NLB in there.
Also, try this:
http://microsoft.com/windows2000/docs/NLBtech2.doc
Jim Harrison
MCP(2K), A+, Network+, PCG
----- Original Message -----
From: "Chhatwal, Raminder S." <RChhatwal@xxxxxxxxxxxxxxxxx>
To: "[ISAserver.org Discussion List]" <isalist@xxxxxxxxxxxxx>
Sent: Monday, September 10, 2001 6:20 AM
Subject: [isalist] Cannot ping the virtual IP on the NLB
http://www.ISAserver.org
Hi,
I am new to NLB. I just configured 2 servers with NLB and a common virtual
IP.
I am unable to ping the virtual IP address but can still get response from
the 2 servers individually.
Can anybody let me know what am I doing wrong.
Thanks
Raminder
------------------------------------------------------
You are currently subscribed to this ISAserver.org Discussion List as:
jim@xxxxxxxxxxxx
To unsubscribe send a blank email to $subst('Email.Unsub')
------------------------------------------------------
You are currently subscribed to this ISAserver.org Discussion List as:
rchhatwal@xxxxxxxxxxxxxxxxx
To unsubscribe send a blank email to $subst('Email.Unsub')
Other related posts:
