RE: Configuring cable modem.
- From: "Greg Mulholland" <greg@xxxxxxxxxxxxxxxx>
- To: "[ISAserver.org Discussion List]" <isalist@xxxxxxxxxxxxx>
- Date: Tue, 14 Oct 2003 20:11:26 -0700
The clients cannot connect? How have you set them up? Are they NAT
clients or are they firewall clients (ie with the software)
Can you resolve to external websites from a client.
Greg
________________________________
From: Mr. George K John [mailto:georgekjohn@xxxxxxxxxxxxx]
Sent: Tuesday, October 14, 2003 7:39 PM
To: [ISAserver.org Discussion List]
AD: Get Thawte's New Step-by-Step SSL Guide for MSIIS:
http://www.isaserver.org/thawte/
Yes, I added in LAT and I am using windows 2000 server ( which doesn't
have an active directory, but it is joined in a domain ) still not
working. Is there anything else to be done?
George
----- Original Message -----
From: Greg Mulholland <mailto:greg@xxxxxxxxxxxxxxxx>
To: [ISAserver.org Discussion List]
<mailto:isalist@xxxxxxxxxxxxx>
Sent: Wednesday, October 15, 2003 6:48 AM
Subject: [isalist] RE: Configuring cable modem.
AD: Get Thawte's New Step-by-Step SSL Guide for MSIIS:
http://www.isaserver.org/thawte/
Did you specify the internal lan address space in the LAT when
you installed it, check the services are started. If you have installed
it on a windows2003 machine, you will need to install isa sp1. Make sure
your clients have the firewall client installed or are web proxy or nat
clients.
Net access seldom works on the isa itself unless you create a
rule for it or use the web proxy .
Generally, you will need to create access policies and site and
content rules to allow traffic to happen.
All that should be run in the "Getting Started Wizard"
Greg
Get Thawte's New Step-by-Step SSL Guide for MSIIS
Find out how to test, purchase, and install a Thawte Digital Certificate
on your MSIIS web server:
http://www.isaserver.org/thawte/
------------------------------------------------------
You are currently subscribed to this ISAserver.org Discussion List as:
gmulholland@xxxxxxxxxxxxxxx
To unsubscribe send a blank email to
$subst('Email.Unsub')
Other related posts:
