[isalist] Re: Cisco --> ISA
- From: D PIETRUSZKA USWRN INTERLINK INFRA SHIFT MGR <DPietruszka@xxxxxx>
- To: "isalist@xxxxxxxxxxxxx" <isalist@xxxxxxxxxxxxx>
- Date: Mon, 3 Nov 2008 08:09:39 -0500
Of course that can be done on an ISA server as well.
Regards
Diego R. Pietruszka
MSC (USA) - Interlink Transport Technologies
From: isalist-bounce@xxxxxxxxxxxxx [mailto:isalist-bounce@xxxxxxxxxxxxx] On
Behalf Of Andrew Hodgson
Sent: Monday, November 03, 2008 8:07 AM
To: isalist
Subject: [isalist] Re: Cisco --> ISA
Hi,
Certainly on the ASA box you can assign the outside interface to a range of IP
addresses, then use static NAT to ensure that the web server on the inside is
presented on the outside using a specific IP address. I have no idea whether
you can do this on an ISA box. You can do this on an ASA 5505 with a base
license (i.e, without any license at all), what you can however not do is to
use the DMZ functions of the ASA device, i.e, have multiple VLANs with
different security levels etc.
Andrew.
________________________________
From: MarvinC [mailto:marvinc@xxxxxxxxx]
Sent: 03 November 2008 12:58
To: isalist@xxxxxxxxxxxxx
Subject: [isalist] Re: Cisco --> ISA
I currently have a Windows web server and now want to add a linux web server to
my test network. Since I have 5 static IP addresses I want to assign a
different IP for the linux server. To do this I know I'll have to add another
NIC and create a second listener on the ISA server. This isn't a problem but
since I have the Cisco equipment and have had it for a while I figure this
would be a good time to break it out and start using it. I knew there'd be some
blow-back about adding the Cisco in place of ISA but I'm not in a position to
upgrade to 2006 and figure playing with the ASA would also enhance my Cisco
skills. Since I didn't buy the ASA device from a "reputable retailer" I'm
unsure about the license so I may run into an issue there.
As of right now it's just a thought and after reading up on it there seems to
be a lot that has to be taken into account in regards to managing it. So I'll
continue to do research and just add the listener as time is an issue with
adding the web server.
thanks
On Fri, Oct 31, 2008 at 11:46 AM, Jerry Young
<jerrygyoungii@xxxxxxxxx<mailto:jerrygyoungii@xxxxxxxxx>> wrote:
Marvin,
Start here.
http://www.cisco.com/en/US/docs/security/asa/asa72/configuration/guide/int5505.html
You might also want to give Cisco Support a call, too. I hear they're pretty
good at helping customers get up and running (although, I haven't worked with
them personally because I don't really play with Cisco devices).
Out of curiousity, why the change from ISA to Cisco?
On Fri, Oct 31, 2008 at 12:01 PM, MarvinC
<marvinc@xxxxxxxxx<mailto:marvinc@xxxxxxxxx>> wrote:
Would anyone happen to have any steps for configuring a Cisco 5505? I have one
that I'd like to either replace my existing ISA 2004 server with or sit it in
front of the ISA server.
tia
--
Cordially yours,
Jerry G. Young II
Microsoft Certified Systems Engineer
--
allpay.net Limited, Fortis et Fides, Whitestone Business Park, Whitestone,
Hereford, HR1 3SE. Registered in England No. 02933191. UK VAT Reg. No. 666 9148
88.
Telephone: 0870 243 3434, Fax: 0870 243 6041.
Website: www.allpay.net</> Email: enquiries@xxxxxxxxxx</>
This email, and any files transmitted with it, is confidential and intended
solely for the use of the individual or entity to whom it is addressed. If you
have received this email in error please notify the allpay.net Information
Security Manager at the number above.
Other related posts:
