Hi Brian, Assign the users/groups on the "Applies to" tab. HTH, Tom Thomas W Shinder www.isaserver.org/shinder ISA Server and Beyond: http://tinyurl.com/1jq1 Configuring ISA Server: http://tinyurl.com/1llp -----Original Message----- From: Brian Miyata [mailto:bmiyata@xxxxxxxxxxxxxxxxx] Sent: Monday, February 03, 2003 11:32 AM To: [ISAserver.org Discussion List] Subject: [isalist] RE: Allowing access based on IP address http://www.ISAserver.org Where is this option to Require Authentication on Site and Content Rules? I know on the Outgoing Web Requests there is an option to require authentication. On the Site and Content rules all I am able to do is: General => Create Name Destinations => All Destinations Schedule => Always Action => Allowed Applies To => Client address sets specified below Client Address Set => xxx.xxx.xxx.xxx HTTP Content => All Content Groups Thanks, Brian ------------------------------------------------------ List Archives: http://www.webelists.com/cgi/lyris.pl?enter=isalist ISA Server Newsletter: http://www.isaserver.org/pages/newsletter.asp ISA Server FAQ: http://www.isaserver.org/pages/larticle.asp?type=FAQ ------------------------------------------------------ Exchange Server Resource Site: http://www.msexchange.org/ Windows Security Resource Site: http://www.windowsecurity.com/ Windows 2000/NT Fax Solutions: http://www.ntfaxfaq.com ------------------------------------------------------ You are currently subscribed to this ISAserver.org Discussion List as: tshinder@xxxxxxxxxxxxxxxxxx To unsubscribe send a blank email to $subst('Email.Unsub')