[PCB_FORUM] dynamic planes
- From: "Paul A. Simonelli" <simonelli_pa@xxxxxxxxxxxx>
- To: <icu-pcb-forum@xxxxxxxxxxxxx>
- Date: Wed, 16 Jun 2004 08:52:13 -0400
To All,
I have a v14.2 board with numerous planes. All of these planes have
many manual voids that are bigger than the default or drc voids. This
was done to meet creepage spacings. When brought into v15.1 and changed
to dynamic shapes the larger voids change to the global parameter
settings. Is there a way to retain the larger voids or do I have add
them manually again? I'm trying to avoid doing this through constraint
manager.
Paul Simonelli, Senior PCB Design Engineer
Pannaway Technologies | v: 603.766.5113 | e: simonelli_pa@xxxxxxxxxxxx
<mailto:%20simonelli_pa@xxxxxxxxxxxx>
=========================================
Other related posts:
