[PCB_FORUM] copper filling of micro vias.
- From: "O Migs" <o.miguelino@xxxxxxxxx>
- To: icu-pcb-forum@xxxxxxxxxxxxx
- Date: Mon, 19 May 2008 09:58:14 -0700
Hi All,
Does anyone know the requirements to copper fill or epoxy fill a microvia?
microvia is via in pad. Is there an alternative?
I have a design that requires a fanout of 3.5 mil trace and 3mil airgap out
of a finepitch bga.
-oscar
____________________________________________________
oscar miguelino | lead pcb engineer | *OQO*, inc.
583 shotwell street | san francisco, ca 94110
*(this message constitutes confidential information proprietary to OQO,
Inc.)*
Other related posts:
