[PCB_FORUM] Re: Text Sizes
- From: "Naren" <naren@xxxxxxxxxx>
- To: icu-pcb-forum@xxxxxxxxxxxxx
- Date: Thu, 14 Apr 2005 16:10:19 +0530 (IST)
Hi Douglas
Have you write programme using skill or script ?
If You have choose skill option than can you share with us?
Douglas Stanley said:
> Vincent,
>
> To answer your original question, yes there are default text sizes. If
> you're in Allegro and create a new board (File->New), the text sizes found
> under Setup->Text Sizes will be the default size. At least this is how it
> works for me in 14.2.
> A quick search of the install tree does not reveal any file(s) that
> control the default sizes, so maybe they're hard-coded. To maintain some
> sembelance of order, I wrote a program that (among other things) sets the
> text sizes to the default every time we build a new symbol.
>
>
> Doug
>
>
>
> Douglas G. Stanley
> Broadcom Corporation - www.broadcom.com
> (949) 926-5889 - voice
> dstanley@xxxxxxxxxxxx
>
>
>
>
> -----Original Message-----
> From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
> [mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx]On Behalf Of Bolman, Shirley H
> Sent: Wednesday, April 13, 2005 9:09 AM
> To: icu-pcb-forum@xxxxxxxxxxxxx
> Subject: [PCB_FORUM] Re: Text Sizes
>
>
> You can get to the same form when you are in the board design. Keep in
> mind that changing text sizes
> here will probably affect every part on the board so caution must be
> used
> here.
> Shirley
>
>
>
> ----------------------------------------------------------------------------
> --
> From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
> [mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Vince Di Lello
> Sent: Wednesday, April 13, 2005 9:05 AM
> To: icu-pcb-forum@xxxxxxxxxxxxx
> Subject: [PCB_FORUM] Re: Text Sizes
>
>
> In reply, we presently do not have Librarian.
>
>
>
> Vincent Di Lello, CID+
>
> Senior CAD Designer
>
> Kaleidescape Canada, Inc.
>
> vdilello@xxxxxxxxxxxxxxxx
>
> (v) 519.772.6418
>
> (f) 519.772.6401
>
> www.kaleidescape.com
>
>
>
>
> ----------------------------------------------------------------------------
> --
>
> From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
> [mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Bolman, Shirley H
> Sent: Wednesday, April 13, 2005 11:51 AM
> To: icu-pcb-forum@xxxxxxxxxxxxx
> Subject: [PCB_FORUM] Re: Text Sizes
>
>
>
> In the 14.2 Librarian tool there is a setup>text sizes that will open a
> form and you put the
>
> desired text sizes in there that will show up on the physical footprint.
>
>
>
> In concept you open Tools>Options select the Text tab. Here is where you
> define the
>
> text size for the Logic symbol. You set both the Text size and the pin
> number size.
>
>
>
> Things may be a little different in 15.2, I haven't explored that yet.
>
> Also I am not sure where the files are saved since I am a Librarian and
> do
> not normally
>
> change projects and setups.
>
>
>
> Shirley
>
>
>
>
> ----------------------------------------------------------------------------
> --
>
> From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
> [mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Vince Di Lello
> Sent: Wednesday, April 13, 2005 7:40 AM
> To: icu-pcb-forum@xxxxxxxxxxxxx
> Subject: [PCB_FORUM] Text Sizes
>
> New user needs help - I am trying to set up a standard for our Text
> Sizes,
> so my question is this. Is there a file somewhere deep, deep in the bowels
> of Allegro that has the Text Sizes and if so, what do I need to do make
> this
> file be our standard Text Size that comes up for all new designs? Also,
> does
> the Symbol Editor use a different Text Size file? Thanks in advance for
> your
> help.
>
>
>
> Vincent Di Lello, CID+
>
> Senior CAD Designer
>
> Kaleidescape Canada, Inc.
>
> vdilello@xxxxxxxxxxxxxxxx
>
> (v) 519.772.6418
>
> www.kaleidescape.com
>
>
>
>
>
-----------------------------------------------------------
To subscribe/unsubscribe:
Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
with a subject of subscribe or unsubscribe
To view the archives of this list please login at
//www.freelists.org. Our list name is icu-pcb-forum
or go to //www.freelists.org/archives/icu-pcb-forum/
Problems or Questions:
Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
Want to post a job listing ? DON'T DO IT HERE!
Better yet, join our jobs listing forum.
SUBSCRIBE: icu-jobs-forum-subscribe@xxxxxxxxxx
POST: icu-jobs-forum@xxxxxxxxxx
-----------------------------------------------------------
Other related posts:
