[PCB_FORUM] Re: Silk Screen REF DES with correct component
- From: "Macindoe, Gary" <Gary.Macindoe@xxxxxxxxxxxx>
- To: <icu-pcb-forum@xxxxxxxxxxxxx>
- Date: Wed, 9 Mar 2011 18:12:47 -0500
I'm on 16.3 S021, "Performance option L" license and it's there.
Regards,
Gary MacIndoe
Senior PCB Layout Designer
Contract - Kelly Services
Covidien
EbD R&D
5920 Longbow Drive
Boulder, CO 80301
303.476.7458
www.covidien.com
P Think Green only print as needed.
From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Hutchins, David
J
Sent: Wednesday, March 09, 2011 2:19 PM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Re: Silk Screen REF DES with correct component
It doesn't appear in 16.3.S016 either, however it does appear in
16.3.S025
From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Douglas Stanley
Sent: Wednesday, March 09, 2011 1:09 PM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Re: Silk Screen REF DES with correct component
I don't see it under my available preference settings. I'm on 16.3.S019.
Douglas G. Stanley
PC Board Designer, Principal
Broadcom Corporation <http://www.broadcom.com/> - Irvine, CA
dstanley@xxxxxxxxxxxx
(949) 926-5889
From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Dave Seymour
Sent: Tuesday, March 08, 2011 6:20 AM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Re: Silk Screen REF DES with correct component
I'll just mention that there is a new User Preference Setting:
Setup > User Preferences > Placement > General > Display_Refdes_Rats
This setting will permanently display a line between the ref des and the
symbol.
I turn it off and on as needed; the screen gets very cluttered quickly.
Hope this helps.
Dave
Dave Seymour
Ixia
www.ixiacom.com
919.267.4840
________________________________
From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Schwartz,
Jerome
Sent: Monday, March 07, 2011 5:04 PM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Re: Silk Screen REF DES with correct component
There was a skill program on sourcelink many years ago that shows errors
for misplacement of silk features.
Jerry
From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Macindoe, Gary
Sent: Monday, March 07, 2011 3:39 PM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Re: Silk Screen REF DES with correct component
Hey Andy,
That's been on my wish list for a while.
I usually get into Show Element with Symbols turned on and pass over the
silk to see if the correct symbol lights up.
You can also move each text to see the "rats", and then oops out of it.
Regards,
Gary MacIndoe
Senior PCB Layout Designer
Contract - Kelly Services
Covidien
EbD R&D
5920 Longbow Drive
Boulder, CO 80301
303.476.7458
www.covidien.com
P Think Green only print as needed.
From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Andy Krawiecki
Sent: Monday, March 07, 2011 11:40 AM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Silk Screen REF DES with correct component
Hi All,
For those not using AUTO_SILK, but use and manipulate SS ref des text
manually....... Is there a way to verify that the SS REF DES is with
its correct component? I know that sometimes when moving/rotating and
adding leader lines, there might be pilot error in that the REF DES
might be switched with an adjacent component.
Thanks,
Andy
Andy Krawiecki
Senior Printed Circuit Designer
Freedom CAD Services, Inc.
20 Cotton Road, Suite 201
Nashua, N.H. 03063
Direct Phone: 603.864.1310
Main Phone: 603.864.1300
Fax: 603.864.1301
Cell: 603.801.8774
Skype: akrawiecki2
andy.krawiecki@xxxxxxxxxxxxxx <mailto:andy.krawiecki@xxxxxxxxxxxxxx>
Visit us at: www.freedomcad.com <http://www.freedomcad.com/>
Other related posts:
